Royer Labs R-12

Of particular note, the R-12 uses the same 2.5 micron ribbon element found in the company’s legendary R-121 microphone. This feature delivers Royer’s well-known high SPL (Sound Pressure Level) capabilities measured at 160dB @ 1kHz. With its switchable -15dB pad, the R-12 can deliver excellent headroom for louder program material such as drums and dimed electric guitars. This important feature eliminates any potential for headroom-related distortion on even the loudest sound sources.

Another notable feature of the new R-12 microphone is its onboard active electronic circuitry, which significantly increases output level for quieter sound sources such as acoustic instruments and vocals. R-12’s active electronics consistently put a perfect load on the ribbon element, enabling the microphone to deliver its full sonic potential.

The R-12 is also outfitted with a switchable High Pass filter precisely tuned to reduce low end proximity buildup, making this microphone a perfect choice for capturing louder vocal performances and close-miking of instruments and loudspeaker cabinets.

Completing its rich feature set, the R-12 houses an internally shock-mounted ribbon transducer, which helps to protect the ribbon element while also reducing handling noise. Combined with its built-in triple-layer wind screen, the microphone’s ribbon is effectively protected against plosives and other wind-related noise.

Features
• Same ribbon element as the R-121
• Internal transducer shock mount
• Built-in triple layer windscreen
• 15dB Pad and high pass filter switches
• Comes with a mic mount and hard-shell carrying case.
• Available in matched pairs.

Recommended applications
• Close miking in the studio and on live stages
• Electric & acoustic guitars
• Drum overheads, kick drum (see manual for position), room miking
• Percussion instruments
• Brass, horn sections
• Strings - solo & sections
• Acoustic piano
• Vocals

Specifications
• Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics
• Polar Pattern:  Figure-8
• Generating Element:  2.5-micron aluminum ribbon
• Magnets:  Rare Earth Neodymium (Grade 52)
• Frequency Response:  30 – 15,000Hz +/- 3dB
• Sensitivity:  -36dB (re. 1V/pa)
• Switchable Pad:  -15dB
• Switchable Bass Cut:  100Hz (6dB per octave)
• Self-Noise:  < 16dB
• Output Impedance: 200 ohms, balanced
• Output Connector:  Male XLR 3-pin (Pin-2 hot)
• Rated Load Impedance: 1k-Ohms, minimum
• Maximum SPL:  > 160dB @ 1kHz, > 135dB @ 30Hz
• Power Requirements:  48-Volt Phantom Power
• Supply Current:  4mA
• Dimensions: Length including mounting base: 8 1/4” (209.5mm) x 1 3/8” (35mm)
• Weight: 462 grams (16.3oz)
• Accessories:  Microphone Holder, Mic Sock, Carrying Case
• Microphone Warranty:  10-year full warranty coverage on materials, workmanship, and finishes to the original owner.   
• Ribbon Element Warranty:  First re-ribbon free to the original owner within one year of purchase.