Mojave Audio MA-301 fetVG

Features

• Multi-pattern: Cardioid, Omnidiectional, Figure-eight (Bi-directional)
• Switchable 15dB pad
• Switchable Bass Roll-off
• Hand-selected 3-micron 1" capsule
• Jensen audio transformer
• Military-grade FET
• Custom designed low-noise resistors
• Ultra clean signal path

Recommended Applications

• Vocals
• Voice Over and Broadcast
• High SPL sources, such as Kick Drums and Bass Guitar Amps
• Electric Guitar
• Piano
• Drum Overheads, Drum Rooms

Specifications

• Transducer Type: Externally polarized, pressure gradient capacitor - double diaphragm.
• Diaphragm: 1-inch diameter, gold sputtered
• Diaphragm Thickness: 3 microns
• Polar Pattern: 3 patterns; omni, cardioid and figure-8
• Frequency Response: 20 Hz to 20 KHZ, +/-3 dB at "flat" setting of bass cut switch. Bass cut switch provides 6 dB per octave attenuation below 100 Hertz in "cut" setting
• Sensitivity: -40.5 dB, re. 1V/pa
• SPL max.: 120 dB with pad off, 135 dB with pad on.
• Distortion: < 1% @ 120 dB SPL , < 3% @ 134 dB SPL with pad off < 1% @ 134 dB SPL, < 3% @ 148 dB SPL with pad on
• Self Noise: 14dB nominal, not to exceed 16dB (A weighted)
• PAD: 15 dB
• Bass Cut: 6 dB per octave below 100 hertz.
• Impedance: 550 ohms, transformer balanced (Jensen)
• Powering: 48VDC phantom power; current 1.2 mA

Dimensions and weight

• Case: 10" x 9" x 4.5"
• Weight Case: 4 lbs
• Dimensions Microphone: 7 5/8" X 2" (194mm x 51mm)
• Weight Microphone: 1 lb. (0.45Kg)