Henry Engineering Multi-System Power Pod

PunchLight WLi is a unique product which uses wireless technology to connect your computer to studio warning lights.

It allows the of use of previously installed PunchLight lights and the expansion of the light system without cables - it can also connect to one external light via 12v output. The WLi connects to your computer via USB and transmits to each light currently via the W-CON RX receiver/s. Theoretically, you can control an unlimited number of wireless lights with one PunchLight WLi unit.

Chandler Limited PSU-2 - External Power Supply
All Chandler Limited units require an external power supply. This avoids noise and hum interferences. The PSU-2 is intended for use with the Mini Rack Mixer Series or Expander.

Please note that the PSU-2 is no longer available for order. It is delivered with the Mini Rack Mixer or the Mini Rack Mixer Expander.

Punchlight V-CON TX is a wireless transmitter, connected to one of the trigger units via a 12V out. The unit is included in the Punchlight Wireless Upgrade Kit.

BURL Audio B80 Mothership external PSU. Shipped only with the Burl Audio Mothership B80.

The BURL Audio BP300 external PSU is included, when ordering a B80 Mothership chassis. Please order only if you need a spare or an additional PSU.  

H2 Audio 008 Rack for H2 Audio 0011 modules
The Rack 008 offers 8 slots for H2 Audio 0011 Preamp + EQ modules in a proprietary format. It is delivered with an external power supply and a 6-pin cable.

Also available in 2 slots rack for 0011 modules. See the H2 Audio 002.

Teknosign MNB – Mini AC Line Conditionner EU 240V/50Hz
Most currents causes un-desired noise and artefacts, the Teknosign MNB is the perfect portable solution for improving the situation. This mini AC Line Conditioner is a  suppressor of interferences and a line air conditioner, providing two outputs of 750 Watts each. The product has an incorporated overcurrent protection and offers a Reset button. The smaller brother of the Teknosign Noise Buster, it is the most suitable solution for all the technicians who work on the road  and want to be ready in whatever working condition.

Supplied with 2 IEC320 C14 to IEC320 C13 cables of 90cm / 3ft.

The new and improved Shadow Hills Power Supply for Equinox, Quad Gama & the Mastering Compressor.

Teknosign HUB – Professional high power USB Hub
Miss a recording because of an interface which often disconnects or interrupts the live set because of an unstable USB connection is the nightmare of every expert who has to integrate the USB inputs of his computer. The Professional High Power USB Hub offers four outputs at high current, up to an Ampere, for each port. This product is ideal to power permanently every kind of audio interface. The Teknosign USB HUB will make you forget all these worries, thanks to its four USB 2.0 ports, powered by 500mA of continuous current. Strong and reliable, it will let you work without hassle.

Similar to the PunchLight GPI and PunchLight MIDI, the PunchLight DLi automatically switches on an external light unit such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp.

It has front panel LED status indication - recording or record ready. Two light units can be controlled simultaneously; the third output is a dedicated connection for the Studio Display XT2 or SD2 (second generation).

The PunchLight DLi is connected via USB to a computer (PC or Mac) in your studio and the USB cable and 12V power supply is included.

External PSU for WesAudio Supercarrier II 500 Series 11 slots rack.

The 500 Rack Supercarrier II comes with its own power supply, order only if you need an additional or a spare power supply.

The Punchlight Merger is a device for larger Punchlight installations and studios. If your studio has multiple rooms, you can now see when recording is taking place on a single Recording Display or other recording light. With a computer and Punchlight trigger unit (PL Midi, GPI, DLi) in each room, the recording "on-off-record ready" data is merged into one stream, and can also be fed to multiple recording lights. A very useful device particularly for large studios. 

Chandler Limited PSU-1 - External Power Supply
All Chandler Limited units require an external power supply. This avoids noise and hum interference. The PSU-1 can supply up to two units (except the Mini Rack Mixer).

PunchLight Midi uses MIDI data transmitted by Pro Tools or another DAW. It also has a ‘record-ready‘ mode which is useful for actors in a dubbing studio and for larger groups of musicians. The device has its own visual signaling system as well as an ability to control any signaling systems already installed in the studio. PunchLight Midi is easy to install and use in any studio environment.

Punchlight W-CON RX is a wireless receiver with one 12V output. The unit is included in the Punchlight Wireless Upgrade Kit.

WesAudio Supercarrier II – 11 slot 500 series rack fully compatible with API standard.
Supercarrier II is a second generation of our very popular Supercarrier I – 500 series standardized chassis. It features 11 slots with innovative ISP technology.

ISP – Independent Slot Power – is a solution which makes a huge breakthrough in 500 series powering system, it allows best accommodation for even most demanding 500 series modules. So what it is all about ? The answer is very simple – based on the ISP technology, each slot is individually supplied with linear power, causing each module to work in totally isolated, and independent way. To say it simple, it is like each of 11 modules would work in separate 500 series frames, what makes it ideal environment for your beloved hardware – without any interference, noise, pops or clicks. To separate each slot even more, we introduced a tantalum caps for each slot to clean the whole frequency spectrum from any other unwanted noise. The chassis itself, is powered by big 100W toroid external supply.

Coil Auio PS6 Rack Tray & Power Supply
House and power up to six CA-70 a CA-286 modules. The PS6 Rack Tray and PSU is comprised of a 7U Rack Tray and a separate 2U power supply. The 'soft-start'/standby feature allows you to switch the Filament and B+ voltages on and off separately.

PS6 Power Supply and Rack Tray sold separately.

H2 Audio 002 Rack for H2 Audio 0011 modules
The Rack 002 offers 2 slots for H2 Audio 0011 preamp + EQ modules in a proprietary format. It is delivered with an external power supply and a 6-pin power cable.

Also available in 8 slots rack for 0011 modules. See the H2 Audio 008.

Punchlight Relay Extender is a new accessory, which takes the PunchLight product line into a new direction. You can control any other device, eg speakers, a microphone or even your own light system via one small additional box.

It is very easy to connect it to an existing PunchLight MIDI or PunchLight GPI and automatically turn appropriate gear on or off.

Henry Engineering MIKE ALERT is an interface device for controlling the dual-color tally indicators on popular “mic arms”. The Mike Alert unit allows two mic arms’ tally lights to be independently controlled, and provides power and control circuitry to operate the white and red tally indicators in each arm.

The Punchlight Relay SwitchBox USB is a small USB powered unit with two built-in switching relays. The unit can control any signalling systems already installed in the studio. You can control any other device, e.g. speakers, a microphone or even your own light system via just one small box. The Relay Switch Box USB can work without a power supply, as it is connected and powered via just a 5V USB port.

Flexible use
The Relay SwitchBox USB is designed for anybody working in project, dubbing, or post production studios who needs visual confirmation of when a recording begins or ends. This simple, precise and easy to use device is perfect for musicians and sound engineers as well as film, tv and video editors. It is easy to install in any studio environment.

External light
It is possible to connect an additional external light, such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp. A 12V power supply is needed in this case. The 12V PSU is not supplied in the package.

Compatible software
The unit is compatible with most audio applications such as Pro Tools, Cubase, Logic Pro, Digital Performer, Samplitude, Reaper, Sonar, Vegas Pro. automatically sends information about Recording start/stop and record "ready" to the Relay Switch Box USB.

Software Utility
All functions are set up via the PunchLight Software Utility

AC adapter for OCX01, OCX02, OCX03, EU

External power supply.

Coil Audio CP-448 - 4 Channels of Phantom Power
The Coil Audio CP-448 is the purest Phantom Power for your modern and vintage condenser microphones available today.

The PunchLight recording indicator is designed for anybody working in project, dubbing, or post production studios who needs visual confirmation of when a recording begins or ends. This simple, precise and easy to use device is perfect for musicians and sound engineers as well as film, TV and video editors.

The PunchLight GPI is a switcher interface for connecting up to three light units at once, such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp. This device connects to the GPI port on SYNC HD or SYNC I/O and works exclusively with Pro Tools HD, without any drivers. An 12V power supply is included.