Punchlight Merger

FEATURES
• Cable merger
• 4 inputs (from PunchLight Midi, GPI, DLi)
• 6 outputs (to Recording Display, Strip, Ring, etc.)
• Smart aluminum frame
• Anodized Black

Compatibility: PunchLight external lights

Connection Example 1:
Connect the 12V output of the PunchLight GPI to INPUT 1. E.g. this monitors the Fader START on a mixing console. Connect the PunchLight DLi to INPUT 2, which is controlled via USB and a workstation with Pro Tools. Connect the lights to the OUTPUTs 1-6 of the Punchlight Merger, which will be switched on both by the recording in Pro Tools (DLi) and by FaderSTART (GPi). Lights connected directly to the two remaining GPi outputs will only respond to FaderSTART – this is not shared.

Connection Example 2:
Connect the output of the W-CON RX to an INPUT on the Punchlight Merger. The transmitter unit can be connected a few rooms further away (e.g. in the main room). You have 6 outputs available for complete signaling in the studio and in front of it.

DIMENSIONS
• 105 x 30 x 105mm - 4.13" x 1.18" x 14.13" (w x h x d)

COMPATIBILITY
• PunchLight external lights