Punchlight Relay Switchbox USB

Punchlight Remote
The wireless controller allows manual control of PunchLight wireless lights, independent of automatic on/off from the DAW. You have instant access to turn the red and yellow lights on/off. If you need to draw more attention to the recording, hold down the red button and the red light will flash for two seconds.
• Manually operated on/off
• No additional software installation
• Wireless transmission distance: 50-150 m (open space)

PunchLight WLi is a unique product which uses wireless technology to connect your computer to studio warning lights.

It allows the of use of previously installed PunchLight lights and the expansion of the light system without cables - it can also connect to one external light via 12v output. The WLi connects to your computer via USB and transmits to each light currently via the W-CON RX receiver/s. Theoretically, you can control an unlimited number of wireless lights with one PunchLight WLi unit.

Punchlight RECORDING Display is a light unit which has to be connected to the PunchLight GPI, PunchLight DLi or the PunchLight MIDI either of which act as a trigger. It is designed for studios where aesthetics are important. In the standard version the product displays "ON AIR" in red and also has lights for "Record Ready". It comes in a very smart brushed aluminium casing. Custom labels, text or graphic can also be specified upon request.

Punchlight V-CON TX is a wireless transmitter, connected to one of the trigger units via a 12V out. The unit is included in the Punchlight Wireless Upgrade Kit.

Punchlight W-CON RX is a wireless receiver with one 12V output. The unit is included in the Punchlight Wireless Upgrade Kit.

Punchlight Recording Strip USB is a simple, compact light which automatically indicates Recording start/stop and record "ready". It is designed to fit in tight spots, and, with its strong magnetic base, to securely attach to any steel surface. Typical usage is above door, at the entrance to the recording room, warning others that recording is in progress.

Punchlight RECORDING Strip USB is a simple, compact light which automatically indicates Recording start/stop and record "ready". It is designed to fit in tight spots, and, with its strong magnetic base, to securely attach to any steel surface. Typical usage is above door, at the entrance to the recording room, warning others that recording is in progress.

Punchlight Studio Display USB is for when you need to see time code precisely and independently from your monitor.

The Studio Display USB greatly expands the features of the existing Time code Display. In addition to time code, the display can show bars&beats, time, or samples. It is extremely slim and compact, 16 mm thin.

Compatible with Pro Tools, Cubase, Nuendo, Logic Pro and most other audio/MIDI applications.

The versatile Studio Displays are used in many of the world's recording and post production studios. It is a great help in orientation during in large projects or dubbing. The imaginative design enhances the professional aluminum frame in black or platinum color and is the perfect size for large or small studios.

The Punchlight Studio Display SD2 greatly expands the features of the existing Timecode Display and PunchLight product lines. In addition to timecode, the display can show bars&beats, time, or samples which is useful for musicians, singers, and other artists as well as dubbing and post-production studios. Compatible with Pro Tools and most other audio/MIDI applications.

Punchlight Studio Display XT2 displays: Bars & Beats / Feet+Frames, Timecode / Samples / Time. It's also a Midi Timecode (MTC) reader and Indicates recording Start / Stop, Record-ready / Pre-roll / Post-roll, Clock and comes with a Sleep mode. Can also display Custom messages with general brightness control and the Recording indication can be set On or off.

Punchlight Recording Ring is a unique, aesthetically stunning studio warning light that can be easily attached to any microphone stand.

It can work standalone with or mounted on any microphone stand. A compact and solid unit made of anodized aluminum, it signals "Recording" by glowing red and "Standby" by glowing yellow. The Recording Ring has the same functionality as the Recording Lamp and has to be connected to the PunchLight GPI, Midi DLI or Switchbox USB acting as a trigger. It can also be controlled manually with the Punchlight USB Utility It is designed for studios where aesthetics are important.

The Punchlight Recording Lamp USB is a small plexiglass light unit which automatically indicates Recording start/stop and record "ready".

A cue can be controlled manually. The plexiglass design and mate finish provide an interesting light effect. The unit is powered directly via USB. No PSU or Midi Interface is needed !

Punchlight RECORDING Display is a light unit which has to be connected to the PunchLight GPI, PunchLight DLi or the PunchLight MIDI either of which act as a trigger. It is designed for studios where aesthetics are important. In the standard version the product displays "RECORDING" in red and also has lights for "Record Ready". It comes in a very smart brushed aluminium casing. Custom labels, text or graphic can also be specified upon request.

The Punchlight Recording PlexSign MINI is a brand-new uniquely designed light unit set in high-grade plexiglass. The illuminated letters are engraved using a high precision milling technique. Aesthetically stunning, it has the same functionality as the Recording Display.

It can be connected to the PunchLight DLi, PunchLight GPI or the PunchLight MIDI either of which act as a trigger. It is designed for studios where aesthetics are important. In the standard version the product displays "RECORDING" in red and also has a light for "Record Ready" (yellow).

It can be hanged to any door or wall via two short wires with hooks. It comes in a very smart brushed aluminum casing.

The Recording PlexSign Large is a brand-new uniquely designed light unit set in high-grade plexiglass. The illuminated letters are engraved using a high precision milling technique. Aesthetically stunning, it has the same functionality as the Recording Display.

It can be connected to the PunchLight DLi, PunchLight GPI or the PunchLight MIDI either of which act as a trigger.

It is designed for studios where aesthetics are important. In the standard version the product displays "RECORDING" in red and also has a light for "Record Ready" (yellow). It attaches to any door or wall via two short wires with hooks. It comes in a very smart brushed aluminum casing.

Similar to the PunchLight GPI and PunchLight MIDI, the PunchLight DLi automatically switches on an external light unit such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp.

It has front panel LED status indication - recording or record ready. Two light units can be controlled simultaneously; the third output is a dedicated connection for the Studio Display XT2 or SD2 (second generation).

The PunchLight DLi is connected via USB to a computer (PC or Mac) in your studio and the USB cable and 12V power supply is included.

PunchLight Midi uses MIDI data transmitted by Pro Tools or another DAW. It also has a ‘record-ready‘ mode which is useful for actors in a dubbing studio and for larger groups of musicians. The device has its own visual signaling system as well as an ability to control any signaling systems already installed in the studio. PunchLight Midi is easy to install and use in any studio environment.

The PunchLight recording indicator is designed for anybody working in project, dubbing, or post production studios who needs visual confirmation of when a recording begins or ends. This simple, precise and easy to use device is perfect for musicians and sound engineers as well as film, TV and video editors.

The PunchLight GPI is a switcher interface for connecting up to three light units at once, such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp. This device connects to the GPI port on SYNC HD or SYNC I/O and works exclusively with Pro Tools HD, without any drivers. An 12V power supply is included.

The Punchlight Relay SwitchBox USB is a small USB powered unit with two built-in switching relays. The unit can control any signalling systems already installed in the studio. You can control any other device, e.g. speakers, a microphone or even your own light system via just one small box. The Relay Switch Box USB can work without a power supply, as it is connected and powered via just a 5V USB port.

Flexible use
The Relay SwitchBox USB is designed for anybody working in project, dubbing, or post production studios who needs visual confirmation of when a recording begins or ends. This simple, precise and easy to use device is perfect for musicians and sound engineers as well as film, tv and video editors. It is easy to install in any studio environment.

External light
It is possible to connect an additional external light, such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp. A 12V power supply is needed in this case. The 12V PSU is not supplied in the package.

Compatible software
The unit is compatible with most audio applications such as Pro Tools, Cubase, Logic Pro, Digital Performer, Samplitude, Reaper, Sonar, Vegas Pro. automatically sends information about Recording start/stop and record "ready" to the Relay Switch Box USB.

Software Utility
All functions are set up via the PunchLight Software Utility