Click for more products.
No products were found.
×

CB Electronics XP-Relay

CB Electronics XP-Relay - Digitally Controlled fully analogue audio relay patchbay. Control analog audio routings right from your computer with the XPatch control program or standalone. The XP-Relay is designed for use switching between Microphones and Mic Amps, or passive switching in a Mastering Chain.

XPatch is designed to replace a physical patch bay, for use switching between Microphones and Mic Amps, or passive switching in a Mastering Chain.

However, the electronic versions cannot pass Phantom. It is possible to implement a smaller digitally controlled patch bay using relays. The new XP-Relay range is designed to satisfy this market and is available in 4 sizes:
• 8 x 8
• Stereo 8 x 8 (stereo pairs only)
• 16 x 8
• 16 x 16

Read moreShow less
€1,640.00 (incl. VAT)

€1,366.67 tax excl.

Please select
  • 8 x 8
  • 8 x 8 Stereo
  • 16 x 8
  • 16 x 16
Avaialble in 10 days
Condition
New
Reference:
XPRELAY
Love0
Add to compare0
Add to wishlist
Description

All units are housed in a 1U rack mounting box and include a 48v linear power supply with remote controllable phantom switching on every input. A configuration setting will enable/disable the phantom completely on any input(s).  When Phantom is Off there is a direct connection between input and output. When Phantom is enabled there is a blocking capacitor between input and output to isolate the 48v.

Up to 4 XPatch or XP-Relay units can be controlled by the XPatch4 software which allows units to be combined in different ways including using two units as stereo pairs, for example two XP-Relay 16x16’s can be controlled as a single stereo 16x16  relay based patch panel.

Mac/Windows GUI
The GUI includes in/out matrix, paths, Equipment List, Metering, Snapshot screens. The GUI communicates with the XP-Relay  via USB.

Updates include Stereo paths, Shortcut Keys, Gain Control,  Undo/Redo for Paths and Equipment List, Independent font size for Matrix and paths, Help in French and English

Features
• Relay switching for direct connection
• Sealed relays, more reliable than open Patchbay contacts
• Suitable for low or high level signals
• Oonboard +48v Phantom available from linear PSU
• Phantom pass through when onboard Phantom is disabled
• Integration with XPatch control Software
• Can be used standalone
• Integrate with XPatch-32/64/96
• Scalable: 8 x 8, Stereo 8 x 8, 16 x 8, 16 x 16
• Combine 2 units for up to 16 x 16 Stereo

Read moreShow less
Product Details
XPRELAY

Data sheet

Condition
New
Type
Patchbay
Application
Tracking, Mixing & Mastering
Channels
8x8
Circuit
Solid State
Format
19"
Chassis
1 U
Quantity
1
Reviews
No comments
48 other products in the same category:
Patchbays
Signex Pro Audio
€312.00 (incl. VAT)
Availability : In stock

Signex Isopatch CPJ48 J - Jack Silver Contacts 48-Points
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and 48 x 1/4 inch type A female Jack connectors on the rear. This version features Silver contacts.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€849.00 (incl. VAT)
Last items in stock

Signex Isopatch Bantam Pro-Series PST96 D25P Patchbay - D-Sub Palladium Contacts - 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.

Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.

The Signex PST96D25 patchbay comes with Bantam Jack connectors on the front and standard Tascam DB25 Sub-D connectors on the back. Palladium contacts.

Patchbays
Signex Pro Audio
€429.00 (incl. VAT)
Available immediately

The Signex Isopatch Bantam CPT96 D25 - 96 Point is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.

The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.

Patchbays
Signex Pro Audio
€62.62 (incl. VAT)
Avaialable immediately

Signex Universal Panel - CPU16
The Signex Universal Panel is an empty panel with 16 channel windows that any of our UPM modules (XLR, RCA, Jack 1/4", MIDI 5 Broches DIN, BNC, Toslink, Blank) will fit into in any arrangement. The sockets fit firm with two small screws and have either solder or socket rear designations.

The Universal Panel is ideal for those with specific patching needs, or those with unusual patch sockets - the Universal Panel can also integrate with digital interfaces and hold new standard connection types like USB 2.0, Firewire and LAN.

Audio Distribution
Henry Engineering
€285.91 (incl. VAT)
Last items in stock

Henry Engineering Patchbox II is a "must have" for your gadget bag! It's a splitter that can take the output of a mixer, and split it into 12 different outputs. It's perfect for remotes, when you need to feed a mixer to a PA system, tape decks, studio link, telco coupler, etc. Patchbox II is passive; it needs no batteries or power.

Henry Engineering PatchBox II is a passive output multiplier that can be used to distribute the output of a professional audio mixer to the inputs of peripheral equipment. PatchBox II is ideal for feeding a mixer as output signal into DAT recorders, digital editors, computer sound cards, cassette and reel decks, VCRs, PA systems, dubbing racks, limiters, and other audio equipment. Both professional equipment with balanced inputs and consumer equipment with unbalanced inputs can be used.

Patchbays
Signex Pro Audio
€413.00 (incl. VAT)
Available immediately

Signex Isopatch CPJ48 D25G - D-Sub Gold Contacts 48-Point
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and two DB25 connectors on the rear. This version features Gold contacts. Displayed model is the Silver contact version.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€448.00 (incl. VAT)
Available in 7 days

The Signex Isopatch Bantam CPT96 D25 - 96 Point Gold Contacts is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.

The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.

Audio Switcher
Henry Engineering
€431.67 (incl. VAT)
Last items in stock

Henry Engineering  StereoSwitch II is a three-input stereo audio switcher. It accepts up to three stereo balanced audio sources, selecting one to be routed to the stereo balanced output. It is ideally suited for numerous broadcast applications, e.g., as a studio switcher, line selector, or for automatic source selection under the control of a broadcast automation system.

StereoSwitch II can also offer 3 additional sources for monitoring controllers or to compare 3 different processing chains.

Patchbays
CB Electronics
€3,240.00 (incl. VAT)
Last items in stock

CB Electronics XPatch-32 - 32 x 32 Digitally Controlled Analogue Audio PatchBay. Control ANalog Audio routings right from your computer with the XPatch-32 program. CB Electronics introduces XPatch-32, designed by multi-award-winning designer Colin Broad. XPatch-32 is a 32x32 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-32 system is controlled by our XPatch-32 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-32 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2x XLR combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

Patchbays
CB Electronics
€6,360.00 (incl. VAT)
Last items in stock

CB Electronics XPatch-64 - 64 x 64 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-64 program. CB Electronics introduces XPatch-64, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-64 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

Patchbays
Signex Pro Audio
€413.00 (incl. VAT)
Available in 8 days

Signex Isopatch CPJ48 PG - RCA Gold Contacts - 48-Points
The Signex Isopatch CPJ48D25G is a patch bay with 48 1/4 inch type A jack sockets on the front panel and 48 female RCA connectors on the rear. This version features Gold contacts. Model pictured is Silver contact version.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€328.00 (incl. VAT)
Available in 8 days

Signex Isopatch CPJ48 P - RCA Silver Contacts - 48-Point
The Signex Isopatch CPJ48D25G is a patch bay with 48 1/4 inch type A jack sockets on the front panel and 48 female RCA connectors on the rear. This version features Silver contacts.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€135.77 (incl. VAT)
Available immediately

Signex QPP48S Patch Bay is TRS/balanced (also available in TS/Unbalanced QPP48) and a very affordable patch panel offering a compact, quality design and exceptional value for money. Using standard 1/4" Jacks for both front and rear connections, instruments may be plugged directly into the front of the Q Patch, while rear connections can be easily made using low cost moulded leads.

The sockets for each channel are mounted on individual cards which are held in the panel by the fixing nuts of the rear sockets. The Q Patch is supplied with all channels isolated, but any channel can be easily normalized by removing the card and refitting it the other way around. The cards have a status indicator mark so that normalized channels can be seen at a glance before it is fitted into the rack.

Audio Signal Multiplier
Teknosign
€395.00 (incl. VAT)
Last items in stock

Teknosign DPS – High grade dual mic splitter
A passive splitter for two microphones, a must-have on every studio or stage, offering for three different outputs for each input channel. Two of them are completely isolated and the third is direct.

Thanks to DPS you can sent your microphone signal to 3 different and simultaneous destinations, without worrying of losing or wrecking the signal.

Strong and solid, like all the BoxLine Series, the DPS is ready to be up in  most difficult situations with ease.

Patchbays
Signex Pro Audio
€395.00 (incl. VAT)
Availability : In stock

The Signex Isopatch Bantam CPT96T - 96-Point is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.

The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.

Patchbays
Signex Pro Audio
€341.66 (incl. VAT)
Available in 8 days

Signex Isopatch CPJ48TG - Direct Solder Gold Contacts - 48-Points
The Signex Isopatch CPJ48TG is a patch bay with 48 1/4 inch type A jack sockets on the front panel and Direct solder terminations on the rear. This version features Gold contacts. Model pictured is Silver contact version.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€386.00 (incl. VAT)
Avaialble immedialtely

Signex Isopatch CPJ4 8J - Jack Silver Contacts - 48-Point
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and 48 x 1/4 inch type A female Jack connectors on the rear. This version features Gold contacts. Model pictured is silver contact version.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Audio Distribution
Henry Engineering
€313.94 (incl. VAT)
Availability : In stock

Henry Engineering U.S.D.A. (Utility Summing & Distribution Amplifier) is a unique 2x4 mini-DA that can be used to combine or split audio signals for distribution. It can be used as a 1x4 or 2x4 DA in stereo or mono.

There are 2 inputs (1 stereo pair) and 4 outputs (2 stereo pairs). Front panel “Stereo/Mono” switches select either a stereo or mono output from each output pair. USDA can produce both stereo and mono outputs simultaneously from a stereo source. Inputs and outputs can be operated either balanced or unbalanced. The audio level of each output can be adjusted over a 26 dB range. All circuitry is transformerless and directcoupled for sonic accuracy.

Signex Pro Audio
Signex Pro Audio
€120.00 (incl. VAT)
Available in 8 days

Signex MIDI Panel CPM22 T - Direct Solder
Signex introduced the MIDI panel to provide a convenient method of localising MIDI interconnections and is a complement, rather than an alternative, to existing methods of MIDI signal routing, The Signex MIDI panel is simply a connector panel: it has no active circuitry and therefore requires no power supply. All sockets are uncommitted and connected only to their respective rear terminations. Any socket can therefore be used for MIDI In, Thru or Out connections.

Patchbays
Signex Pro Audio
€226.26 (incl. VAT)
Available immediately

Signex Isopatch CPJ48 T - Direct Solder Silver Contacts- 48-Point
The Signex Isopatch CPJ48T is a patch bay with 48 1/4 inch type A jack sockets on the front panel and Direct solder terminations on the rear. This version features Silver contacts.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€440.00 (incl. VAT)
Availability : In stock

Signex Isopatch Bantam Pro-Series PST96 T Patchbay - Direct Solder Silver Contacts - 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.

Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.

The Signex PST96D25 patchbay comes with Bantam Jack connectors on the front and Direct solder terminations on the back. Silver contacts.

Patchbays
Signex Pro Audio
€474.00 (incl. VAT)
Available immediately

Signex Isopatch Bantam Pro-Series PST96 D25 Patchbay - D-Sub Silver Contacts 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.

Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.

The Signex PST96D25 patchbay comes with Bantam Jack connectors on the front and standard Tascam DB25 Sub-D connectors on the back. Silevr contacts.

Patchbays
Signex Pro Audio
€446.00 (incl. VAT)
Availability : 8 days

Signex Isopatch Bantam Pro-Series PST96TG Patch bay - Direct Solder Gold Contacts - 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.

Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.

The Signex PST96TP patchbay comes with Bantam Jack connectors on the front and Direct solder terminations on the back. Gold contacts.

Patchbays
Signex Pro Audio
€98.64 (incl. VAT)
Avaialble immediately

Signex QPP48 Patch Bay is mono (TS)/Unbalanced (also available in TRS/Balanced Qpp48S) and an affordable patch panel offering a compact, quality design and exceptional value for money. Using standard 1/4" Jacks for both front and rear connections, instruments may be plugged directly into the front of the Q Patch, while rear connections can be easily made using low cost moulded leads.

The sockets for each channel are mounted on individual cards which are held in the panel by the fixing nuts of the rear sockets. The Q Patch is supplied with all channels isolated, but any channel can be easily normalized by removing the card and refitting it the other way around. The cards have a status indicator mark so that normalized channels can be seen at a glance before it is fitted into the rack.

Patchbays
Signex Pro Audio
€276.00 (incl. VAT)
Available immediately

Signex Isopatch CPJ48 D25 - D-Sub Silver Contacts 48-Points
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and two DB25 connectors on the rear. This version features Silver contacts.

The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!

Patchbays
Signex Pro Audio
€126.00 (incl. VAT)
Available immediately

Signex MIDI Panel CPM22 M - DIN
Signex introduced the MIDI panel to provide a convenient method of localising MIDI interconnections and is a complement, rather than an alternative, to existing methods of MIDI signal routing, The Signex MIDI panel is simply a connector panel: it has no active circuitry and therefore requires no power supply. All sockets are uncommitted and connected only to their respective rear terminations. Any socket can therefore be used for MIDI In, Thru or Out connections.

Accessories
Signex Pro Audio
€35.00 (incl. VAT)
Available immediately

Signex Lacing Bar LBK01
Allows to support the often heavy weight cables in the back of the Patch bays. Several possible configurations depending on the panels and their terminations. Attached to the Patch bay by four small screws (supplied) which can therefore be removed to facilitate handling during wiring and installation.

Compatible with all Signex Patchbays except the Q Patch.

Patchbays
Signex Pro Audio
€415.00 (incl. VAT)
Availability : In stock

The Signex Isopatch Bantam CPT96T - 96-Point with Gold plated phosphor-bronze contacts is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.

The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.

You may also like
Timecode Displays
CB Electronics
€820.00 (incl. VAT)
Available in 10 days

CB Electronics TC-5B RS422 Generator (Rack Ears Included), Reader, Converter LTC-RS422-USB, GPIO, Real Time Clock.
The TC-5B-RS422 is a professional MTC/LTC interface with LED display, Video Sync, Word Clock input and USB port. The TC-5B-RS-422 is designed to be equally at home in Audio, Video and Lighting Environments, applications include Digital Audio Workstations, Non Linear Video Editors, Mixing Consoles, Show Control and Lighting Control.

As a test tool the TC-5B-RS422 can check the frequency of Timecode, MTC, Video and Word Clock. The TC-5 can also compare LTC with MTC.

Timecode Displays
CB Electronics
€820.00 (incl. VAT)
Last items in stock

CB Electronics TC-5B MIDI Timecode Interface (Rack Ears Included) - Timecode Generator, Reader, Converter LTC-MIDI-USB, GPIO, Real Time Clock. The TC-5B-Midi is a professional MTC/LTC interface with LED display, Video Sync, Word Clock input and USB port. The TC-5 is designed to be equally at home in Audio, Video and Lighting Environments, applications include Digital Audio Workstations, Non Linear Video Editors, Mixing Consoles, Show Control and Lighting Control.

As a test tool the TC-5B-Midi can check the frequency of Timecode, MTC, Video and Word Clock. The TC-5 can also compare LTC with MTC.

Monitoring Controllers
CB Electronics
€1,699.00 (incl. VAT)
Avaialble in 10 days

CB Electronics TMC-2 Télécommande pour contrôleur de moniitoring, offre un système de monitoring de grande console sans avoir besoin d'une grande console.
Dans une industrie qui évolue vers le travail et le mixage "dans la boîte", il y a encore des situations où le contrôle manuel est le meilleur; le TMC-1 offre des caractéristiques et un contrôle sans précédent qui n'ont rien à voir avec son ergonomie.

The TMC-2 has 13 more keys than the TMC-1 but it is only 20mm wider and new keys have been added:
- Six input select keys in a column on the left
- A Master [Link] key or the right, used to Link the main output to all or selected cue
outputs
- Three [Scene] keys on the right, These can be used to preset multiple settings but are
initially programmed to select between the three speaker sets.
- A dedicated T/B switch on the Right, you can define the Talkback function in the
setup menu
- Two extra User keys below the TFT screen, in the picture above they have not been
assigned.

TMC-2 est compatible avec les systèmes de monitoring suivants :
• CB Electronics A-Mon
• CB ELECTRONICS i-Mon
• CB Electronics Xpand
• Avid X-Mon
• AVID MTRX STUDIO
• Avid MTRX
• DAD AX 32
• NTP Penta 720
• Yamaha MMP-1
• Trinnov D-Mon
• Ashly Ne8800

Monitoring Controllers
CB Electronics
€1,499.00 (incl. VAT)
Last items in stock

CB Electronics TMC-1 Monitor Controller Remote, the large console monitor system without the need for a large console.
In an industry that is moving towards working and mixing 'in the box', there are still situations where hands-on control is best; the TMC-1 offers unprecedented features and control that belie its small size.

The TMC-1 is compatible with the following monitoring devices:
• CB Electronics A-Mon
• CB ELECTRONICS i-Mon
• CB Electronics Xpand
• Avid X-Mon
• AVID MTRX STUDIO
• Avid MTRX
• DAD AX 32
• NTP Penta 720
• Yamaha MMP-1
• Trinnov D-Mon
• Ashly Ne8800

Patchbays
CB Electronics
€11,628.00 (incl. VAT)
Available in 10 days

CB Electronics XPatch-96 - 96 x 96 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-96 program. CB Electronics introduces XPatch-96, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-96 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

Patchbays
CB Electronics
€6,360.00 (incl. VAT)
Last items in stock

CB Electronics XPatch-64 - 64 x 64 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-64 program. CB Electronics introduces XPatch-64, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-64 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

Patchbays
CB Electronics
€3,240.00 (incl. VAT)
Last items in stock

CB Electronics XPatch-32 - 32 x 32 Digitally Controlled Analogue Audio PatchBay. Control ANalog Audio routings right from your computer with the XPatch-32 program. CB Electronics introduces XPatch-32, designed by multi-award-winning designer Colin Broad. XPatch-32 is a 32x32 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-32 system is controlled by our XPatch-32 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-32 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2x XLR combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

Monitoring Controllers
CB Electronics
€2,340.00 (incl. VAT)
Avaialble in 10 days

CB Electronics I-Mon - 34 I/P, 27 O/P IMMERSIVE ANALOGUE MONITOR CONTROLLER FOR 14.1, 12.1, 7.1, 5.1 AND STEREO  
Based on the A-Mon the I-Mon immersive analogue monitor control unit is housed in a 1U rack mount box. Designed for any format from stereo to 12 or 14 channel immersive audio. This versatile unit is designed to provide a cost effective solution to installing immersive monitoring in studios. The I-Mon may be configured with either 12 or 14 channel Main input and Main output and with either 1 or 2 talkback and listen mic inputs.

Monitoring Controllers
CB Electronics
€2,340.00 (incl. VAT)
Last items in stock

CB Electronics A-Mon - Analogue Monitor Controller for Atmos, 7.1, 5.1 and Stereo
A-Mon is designed as a analogue Stereo / 5.1 / 7.1 monitor controller for use with the TMC-1 remote. Using feedback from existing TMC-1 customers, the A-Mon is a full studio monitor system that incorporates some unique features including re-assigning the rear surround to side surround when switching from 7.1 to 5.1 with surround level correction.

Menu

Settings

Share

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in