CB Electronics TC-5B-MIDI

CB Electronics TC-5B RS422 Generator (Rack Ears Included), Reader, Converter LTC-RS422-USB, GPIO, Real Time Clock.
The TC-5B-RS422 is a professional MTC/LTC interface with LED display, Video Sync, Word Clock input and USB port. The TC-5B-RS-422 is designed to be equally at home in Audio, Video and Lighting Environments, applications include Digital Audio Workstations, Non Linear Video Editors, Mixing Consoles, Show Control and Lighting Control.

As a test tool the TC-5B-RS422 can check the frequency of Timecode, MTC, Video and Word Clock. The TC-5 can also compare LTC with MTC.

CB Electronics XP-Relay - Digitally Controlled fully analogue audio relay patchbay. Control analog audio routings right from your computer with the XPatch control program or standalone. The XP-Relay is designed for use switching between Microphones and Mic Amps, or passive switching in a Mastering Chain.

XPatch is designed to replace a physical patch bay, for use switching between Microphones and Mic Amps, or passive switching in a Mastering Chain.

However, the electronic versions cannot pass Phantom. It is possible to implement a smaller digitally controlled patch bay using relays. The new XP-Relay range is designed to satisfy this market and is available in 4 sizes:
• 8 x 8
• Stereo 8 x 8 (stereo pairs only)
• 16 x 8
• 16 x 16

CB Electronics TMC-2 Télécommande pour contrôleur de moniitoring, offre un système de monitoring de grande console sans avoir besoin d'une grande console.
Dans une industrie qui évolue vers le travail et le mixage "dans la boîte", il y a encore des situations où le contrôle manuel est le meilleur; le TMC-1 offre des caractéristiques et un contrôle sans précédent qui n'ont rien à voir avec son ergonomie.

The TMC-2 has 13 more keys than the TMC-1 but it is only 20mm wider and new keys have been added:
- Six input select keys in a column on the left
- A Master [Link] key or the right, used to Link the main output to all or selected cue
outputs
- Three [Scene] keys on the right, These can be used to preset multiple settings but are
initially programmed to select between the three speaker sets.
- A dedicated T/B switch on the Right, you can define the Talkback function in the
setup menu
- Two extra User keys below the TFT screen, in the picture above they have not been
assigned.

TMC-2 est compatible avec les systèmes de monitoring suivants :
• CB Electronics A-Mon
• CB ELECTRONICS i-Mon
• CB Electronics Xpand
• Avid X-Mon
• AVID MTRX STUDIO
• Avid MTRX
• DAD AX 32
• NTP Penta 720
• Yamaha MMP-1
• Trinnov D-Mon
• Ashly Ne8800

CB Electronics TMC-1 Monitor Controller Remote, the large console monitor system without the need for a large console.
In an industry that is moving towards working and mixing 'in the box', there are still situations where hands-on control is best; the TMC-1 offers unprecedented features and control that belie its small size.

The TMC-1 is compatible with the following monitoring devices:
• CB Electronics A-Mon
• CB ELECTRONICS i-Mon
• CB Electronics Xpand
• Avid X-Mon
• AVID MTRX STUDIO
• Avid MTRX
• DAD AX 32
• NTP Penta 720
• Yamaha MMP-1
• Trinnov D-Mon
• Ashly Ne8800

CB Electronics XPatch-96 - 96 x 96 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-96 program. CB Electronics introduces XPatch-96, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-96 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

CB Electronics XPatch-64 - 64 x 64 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-64 program. CB Electronics introduces XPatch-64, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-64 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

CB Electronics XPatch-32 - 32 x 32 Digitally Controlled Analogue Audio PatchBay. Control ANalog Audio routings right from your computer with the XPatch-32 program. CB Electronics introduces XPatch-32, designed by multi-award-winning designer Colin Broad. XPatch-32 is a 32x32 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.

The XPatch-32 system is controlled by our XPatch-32 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-32 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.

The front panel is equipped with 2x XLR combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).

CB Electronics I-Mon - Based on the A-Mon the I-Mon immersive analogue monitor control unit is housed in a 1U rack mount box. Designed for any format from stereo to 12 or 14 channel immersive audio. This versatile unit is designed to provide a cost effective solution to installing immersive monitoring in smaller studios. The I-Mon may be configured with either 12 or 14 channel Main input and Main output and with either 1 or 2 talkback and listen mic inputs.

Available Remotes: TMC-1 and TMC-2

CB Electronics A-Mon
A-Mon Stereo / 5.1 / 7.1 analogue monitor controller for use with the TMC-1 remote for full functionality or as a X-Mon replacement (Limited to X-Mon functionality). 
Using feedback from existing TMC-1 customers the A-Mon is a full studio monitor system that incorporates some unique features including rear-side surround switching for 5.1

Available Remotes: TMC-1 and TMC-2