Signex Universal Patch Module UPM02 Male XLR

The Signex Isopatch Bantam CPT96T - 96-Point with Gold plated phosphor-bronze contacts is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in...

Signex Isopatch CPJ48 J - Jack Silver Contacts 48-PointsThe Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and 48 x 1/4 inch type A female Jack connectors on the rear....

Teknosign DPS – High grade dual mic splitterA passive splitter for two microphones, a must-have on every studio or stage, offering for three different outputs for each input channel. Two of them are completely...

Signex Isopatch CPJ48 D25 - D-Sub Silver Contacts 48-PointsThe Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and two DB25 connectors on the rear. This version features...

Signex Isopatch CPJ48TG - Direct Solder Gold Contacts - 48-PointsThe Signex Isopatch CPJ48TG is a patch bay with 48 1/4 inch type A jack sockets on the front panel and Direct solder terminations on the rear. This...

Universal BNC 75Ω Module UPM25 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Universal Nylon Female XLR Module UPM04 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Universal Female RCA, gold, Red insulator Module UPM17 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Teknosign Patchbay offering 16 channels in a 1 rack unit chassis with male & female XLR connectors on the front and D-SUB 25, standard Tascam format, on the back panel, to connect easily and quickly your...

Teknosign PBA XLR 32 C Patchbay offering 32 points in a 2 rack units chassis with Combo XLR input connectors on the front and DB25 (standard Tascam) output on the rear panel, to connect easily and quickly your...

Universal Module Blank Plate UPM00 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations. 4 modules Pack.

Signex Isopatch CPJ48 D25G - D-Sub Gold Contacts 48-PointThe Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and two DB25 connectors on the rear. This version features...

Teknosign PBA 16 XLR M Patchbay offering 16 Points in a 19" rack 1 unit chassis with Combo XLR connectors on the front and D-SUB 25 standard Tascam format on the rear panel, to connect easily and quickly your...

The Signex Isopatch Bantam CPT96 D25 - 96 Point is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed...

Signex Isopatch Bantam Pro-Series PST96TG Patch bay - Direct Solder Gold Contacts - 48-PointThe Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.Although designed...

Signex Isopatch CPJ48 P - RCA Silver Contacts - 48-PointThe Signex Isopatch CPJ48D25G is a patch bay with 48 1/4 inch type A jack sockets on the front panel and 48 female RCA connectors on the rear. This version...

Teknosign PBA 16 XLR C Patchbay offering 16 Points in a 1 unit 19" rack chassis with 16 Combo Input connectors on the front and 2 x DB25 (standard Tascam) Output connectors on the rear panel, to patch easily and...

Signex Isopatch Bantam Pro-Series PST96 D25P Patchbay - D-Sub Palladium Contacts - 48-PointThe Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.Although designed...

The Signex Isopatch Bantam CPT96 D25 - 96 Point Gold Contacts is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam...

Signex QPP48S Patch Bay is TRS/balanced and a very affordable patch panel offering a compact, quality design and exceptional value for money. Using standard 1/4" Jacks for both front and rear connections, instruments...

Teknosign PBA 32 XLR F Patchbay offering 32 points in a 2 rack units chassis with female XLR input connectors on the front and DB25 (standard Tascam) output on the rear panel, to connect easily and quickly your...

Signex Isopatch CPJ4 8J - Jack Silver Contacts - 48-PointThe Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and 48 x 1/4 inch type A female Jack connectors on the rear....

Signex Universal Panel - CPU16The Signex Universal Panel is an empty panel with 16 channel windows that any of our UPM modules (XLR, RCA, Jack 1/4", MIDI 5 Broches DIN, BNC, Toslink, Blank) will fit into in any...

Signex Isopatch CPJ48 T - Direct Solder Silver Contacts- 48-PointThe Signex Isopatch CPJ48T is a patch bay with 48 1/4 inch type A jack sockets on the front panel and Direct solder terminations on the rear. This...

Signex Isopatch CPJ48 PG - RCA Gold Contacts - 48-PointsThe Signex Isopatch CPJ48D25G is a patch bay with 48 1/4 inch type A jack sockets on the front panel and 48 female RCA connectors on the rear. This version...

Signex QPP48 Patch Bay is mono (TS)/Unbalanced and an affordable patch panel offering a compact, quality design and exceptional value for money. Using standard 1/4" Jacks for both front and rear connections,...

Universal Nylon Female XLR Module UPM03 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Universal Metal Female XLR Module UPM01 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Henry Engineering  StereoSwitch II is a three-input stereo audio switcher. It accepts up to three stereo balanced audio sources, selecting one to be routed to the stereo balanced output. It is ideally suited for...

Signex Lacing Bar LBK01Allows to support the often heavy weight cables in the back of the Patch bays. Several possible configurations depending on the panels and their terminations. Attached to the Patch bay by four...

Signex Isopatch Bantam Pro-Series PST96 D25 Patchbay - D-Sub Silver Contacts 48-PointThe Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.Although designed primarily for...

Teknosign Patchbay offering 32 points I/O a 2 rack units chassis with 16 male and 16 female XLR input/output connectors on the front and DB25 connector (standard Tascam) for the output on the rear panel, to connect...

Signex MIDI Panel CPM22 T - Direct SolderSignex introduced the MIDI panel to provide a convenient method of localising MIDI interconnections and is a complement, rather than an alternative, to existing methods of MIDI...

Henry Engineering U.S.D.A. (Utility Summing & Distribution Amplifier) is a unique 2x4 mini-DA that can be used to combine or split audio signals for distribution. It can be used as a 1x4 or 2x4 DA in stereo or...

Signex MIDI Panel CPM22 M - DINSignex introduced the MIDI panel to provide a convenient method of localising MIDI interconnections and is a complement, rather than an alternative, to existing methods of MIDI signal...

Teknosign XLR-ADAPTER provides the interconnection of 16 channels of XLR female to 16 channels on DB25 standard Tascam DB25 connectors, in a 19" frame 2 rack units. Connect quickly and easily your devices for a very...

Universal Brushed Metal Female Jack A 3 pole Module UPM10 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Universal Patch Module Female DIN 5 pôles UPM15 module for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Universal BNC 75Ω Module UPM21 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Teknosign PBA 16 XLR F Patchbay offering 16 Point in a 19" rack 1 unit chassis with female XLR connectors on the front and D-SUB 25 standard Tascam format on the rear panel, to connect easily and quickly your...

Henry Engineering Patchbox II is a "must have" for your gadget bag! It's a splitter that can take the output of a mixer, and split it into 12 different outputs. It's perfect for remotes, when you need to feed a mixer...

Signex Isopatch Bantam Pro-Series PST96 T Patchbay - Direct Solder Silver Contacts - 48-PointThe Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.Although designed...

The Signex Isopatch Bantam CPT96T - 96-Point is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and...

Universal Female RCA, gold, black insulator Module UPM16 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.

Teknosign PBA 32 XLR M Patchbay offering 32 Points in a 2 units 19" rack chassis with male XLR Output connectors on the front and 4 x DB25 (standard Tascam) input connectors on the rear panel, to patch easily and...