CB Electronics XPatch-64 - 64 x 64 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-64 program. CB Electronics introduces XPatch-64, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.
The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-64 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.
The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).
Universal Module Blank Plate UPM00 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations. 4 modules Pack.
Signex Isopatch CPJ48 PG - RCA Gold Contacts - 48-Points
The Signex Isopatch CPJ48D25G is a patch bay with 48 1/4 inch type A jack sockets on the front panel and 48 female RCA connectors on the rear. This version features Gold contacts. Model pictured is Silver contact version.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
Teknosign PBA 32 XLR F Patchbay offering 32 points in a 2 rack units chassis with female XLR input connectors on the front and DB25 (standard Tascam) output on the rear panel, to connect easily and quickly your outboards for a very affordable price.
CB Electronics XPatch-32 - 32 x 32 Digitally Controlled Analogue Audio PatchBay. Control ANalog Audio routings right from your computer with the XPatch-32 program. CB Electronics introduces XPatch-32, designed by multi-award-winning designer Colin Broad. XPatch-32 is a 32x32 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.
The XPatch-32 system is controlled by our XPatch-32 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-32 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.
The front panel is equipped with 2x XLR combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).
Teknosign PBA 16 XLR C Patchbay offering 16 Points in a 1 unit 19" rack chassis with 16 Combo Input connectors on the front and 2 x DB25 (standard Tascam) Output connectors on the rear panel, to patch easily and quickly your outboards for a very affordable price.
Signex Isopatch Bantam Pro-Series PST96TG Patch bay - Direct Solder Gold Contacts - 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.
Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.
The Signex PST96TP patchbay comes with Bantam Jack connectors on the front and Direct solder terminations on the back. Gold contacts.
Universal BNC 75Ω Module UPM25 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Patch Module Female DIN 5 pôles UPM15 module for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Signex Universal Panel - CPU16
The Signex Universal Panel is an empty panel with 16 channel windows that any of our UPM modules (XLR, RCA, Jack 1/4", MIDI 5 Broches DIN, BNC, Toslink, Blank) will fit into in any arrangement. The sockets fit firm with two small screws and have either solder or socket rear designations.
The Universal Panel is ideal for those with specific patching needs, or those with unusual patch sockets - the Universal Panel can also integrate with digital interfaces and hold new standard connection types like USB 2.0, Firewire and LAN.
Teknosign Patchbay offering 32 points I/O a 2 rack units chassis with 16 male and 16 female XLR input/output connectors on the front and DB25 connector (standard Tascam) for the output on the rear panel, to connect easily and quickly your outboards for a very affordable price.
Signex MIDI Panel CPM22 T - Direct Solder
Signex introduced the MIDI panel to provide a convenient method of localising MIDI interconnections and is a complement, rather than an alternative, to existing methods of MIDI signal routing, The Signex MIDI panel is simply a connector panel: it has no active circuitry and therefore requires no power supply. All sockets are uncommitted and connected only to their respective rear terminations. Any socket can therefore be used for MIDI In, Thru or Out connections.
Mystery Magicians M808APB front panel patchbay system and exclusively engineered routing utility for the M808A dual-channel microphone preamplifier.
Set up your workstation with routing flexibility by adding both channels’ I/Os in the front panel.
CB Electronics XP-Relay - Digitally Controlled fully analogue audio relay patchbay. Control analog audio routings right from your computer with the XPatch control program or standalone. The XP-Relay is designed for use switching between Microphones and Mic Amps, or passive switching in a Mastering Chain.
XPatch is designed to replace a physical patch bay, for use switching between Microphones and Mic Amps, or passive switching in a Mastering Chain.
However, the electronic versions cannot pass Phantom. It is possible to implement a smaller digitally controlled patch bay using relays. The new XP-Relay range is designed to satisfy this market and is available in 4 sizes:
• 8 x 8
• Stereo 8 x 8 (stereo pairs only)
• 16 x 8
• 16 x 16
Teknosign Patchbay offering 16 channels in a 1 rack unit chassis with male & female XLR connectors on the front and D-SUB 25, standard Tascam format, on the back panel, to connect easily and quickly your outboards, for a very affordable price.
Signex Isopatch CPJ48 P - RCA Silver Contacts - 48-Point
The Signex Isopatch CPJ48D25G is a patch bay with 48 1/4 inch type A jack sockets on the front panel and 48 female RCA connectors on the rear. This version features Silver contacts.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
Signex Isopatch Bantam Pro-Series PST96 D25 Patchbay - D-Sub Silver Contacts 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.
Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.
The Signex PST96D25 patchbay comes with Bantam Jack connectors on the front and standard Tascam DB25 Sub-D connectors on the back. Silevr contacts.
Universal BNC 75Ω Module UPM21 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Metal Female XLR Module UPM02 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Teknosign PBA 32 XLR M Patchbay offering 32 Points in a 2 units 19" rack chassis with male XLR Output connectors on the front and 4 x DB25 (standard Tascam) input connectors on the rear panel, to patch easily and quickly your outboards for a very affordable price.
Henry Engineering StereoSwitch II is a three-input stereo audio switcher. It accepts up to three stereo balanced audio sources, selecting one to be routed to the stereo balanced output. It is ideally suited for numerous broadcast applications, e.g., as a studio switcher, line selector, or for automatic source selection under the control of a broadcast automation system.
StereoSwitch II can also offer 3 additional sources for monitoring controllers or to compare 3 different processing chains.
Signex QPP48 Patch Bay is mono (TS)/Unbalanced (also available in TRS/Balanced Qpp48S) and an affordable patch panel offering a compact, quality design and exceptional value for money. Using standard 1/4" Jacks for both front and rear connections, instruments may be plugged directly into the front of the Q Patch, while rear connections can be easily made using low cost moulded leads.
The sockets for each channel are mounted on individual cards which are held in the panel by the fixing nuts of the rear sockets. The Q Patch is supplied with all channels isolated, but any channel can be easily normalized by removing the card and refitting it the other way around. The cards have a status indicator mark so that normalized channels can be seen at a glance before it is fitted into the rack.
Teknosign PBA XLR 32 C Patchbay offering 32 points in a 2 rack units chassis with Combo XLR input connectors on the front and DB25 (standard Tascam) output on the rear panel, to connect easily and quickly your outboards for a very affordable price.
Signex QPP48S Patch Bay is TRS/balanced (also available in TS/Unbalanced QPP48) and a very affordable patch panel offering a compact, quality design and exceptional value for money. Using standard 1/4" Jacks for both front and rear connections, instruments may be plugged directly into the front of the Q Patch, while rear connections can be easily made using low cost moulded leads.
The sockets for each channel are mounted on individual cards which are held in the panel by the fixing nuts of the rear sockets. The Q Patch is supplied with all channels isolated, but any channel can be easily normalized by removing the card and refitting it the other way around. The cards have a status indicator mark so that normalized channels can be seen at a glance before it is fitted into the rack.
Signex Isopatch CPJ48 T - Direct Solder Silver Contacts- 48-Point
The Signex Isopatch CPJ48T is a patch bay with 48 1/4 inch type A jack sockets on the front panel and Direct solder terminations on the rear. This version features Silver contacts.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
The Signex Isopatch Bantam CPT96T - 96-Point with Gold plated phosphor-bronze contacts is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.
The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.
Teknosign PBA 16 XLR M Patchbay offering 16 Points in a 19" rack 1 unit chassis with Combo XLR connectors on the front and D-SUB 25 standard Tascam format on the rear panel, to connect easily and quickly your outboards for a very affordable price.
Universal Female RCA, gold, Red insulator Module UPM17 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Metal Female XLR Module UPM01 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Signex Isopatch Bantam Pro-Series PST96 T Patchbay - Direct Solder Silver Contacts - 48-Point
The Isopatch Bantam was introduced in 1991 as an alternative to the standard long-frame patch panel.
Although designed primarily for the semi-pro audio market, the Isopatch Bantam was found to be extremely reliable and became popular in more demanding applications including sound reinforcement and broadcast. Installation contractors love the Isopatch Bantam because the normalising is so easy to program and the rear 25 pin D-sub connectors mean that they can use pre-made cables and just plug in on-site saving hours of tedious wiring.
The Signex PST96D25 patchbay comes with Bantam Jack connectors on the front and Direct solder terminations on the back. Silver contacts.
The Signex Isopatch Bantam CPT96 D25 - 96 Point is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.
The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.
The Signex Isopatch Bantam CPT96T - 96-Point is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.
The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.
CB Electronics XPatch-96 - 96 x 96 Digitally Controlled Analogue Audio PatchBay. Control Analog Audio routings right from your computer with the XPatch-96 program. CB Electronics introduces XPatch-96, designed by multi-award-winning designer Colin Broad. XPatch-64 is a 64x64 digitally controlled, fully analogue audio patch bay routing system for audio professionals and aimed at streamlining workflow in even the most demanding post or music studios.
The XPatch-64 system is controlled by our XPatch-64 program via USB, allowing for complex routings in seconds. Create, store and recall routings from sessions. Any input can be sent to multiple outputs. The XPatch-96 design is based on the A-Mon / I-Mon and shares the I/O and CPU cards, allowing for input and output muting and even gain control.
The front panel is equipped with 2 XLR Combo connectors for input XLR line-level / ¼ inch jack DI input, plus 2 XLR output for quick auditioning of equipment. Also included are ¼ inch jack for headphone monitoring of inputs and outputs, OLED display and encoder with push button for function selection. In addition, there is a ¼ inch jack socket for a switch to step through snapshots (presets).
Henry Engineering U.S.D.A. (Utility Summing & Distribution Amplifier) is a unique 2x4 mini-DA that can be used to combine or split audio signals for distribution. It can be used as a 1x4 or 2x4 DA in stereo or mono.
There are 2 inputs (1 stereo pair) and 4 outputs (2 stereo pairs). Front panel “Stereo/Mono” switches select either a stereo or mono output from each output pair. USDA can produce both stereo and mono outputs simultaneously from a stereo source. Inputs and outputs can be operated either balanced or unbalanced. The audio level of each output can be adjusted over a 26 dB range. All circuitry is transformerless and directcoupled for sonic accuracy.
Universal Nylon Female XLR Module UPM03 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Henry Engineering Patchbox II is a "must have" for your gadget bag! It's a splitter that can take the output of a mixer, and split it into 12 different outputs. It's perfect for remotes, when you need to feed a mixer to a PA system, tape decks, studio link, telco coupler, etc. Patchbox II is passive; it needs no batteries or power.
Henry Engineering PatchBox II is a passive output multiplier that can be used to distribute the output of a professional audio mixer to the inputs of peripheral equipment. PatchBox II is ideal for feeding a mixer as output signal into DAT recorders, digital editors, computer sound cards, cassette and reel decks, VCRs, PA systems, dubbing racks, limiters, and other audio equipment. Both professional equipment with balanced inputs and consumer equipment with unbalanced inputs can be used.
Teknosign PBA 16 XLR F Patchbay offering 16 Point in a 19" rack 1 unit chassis with female XLR connectors on the front and D-SUB 25 standard Tascam format on the rear panel, to connect easily and quickly your outboards for a very affordable price.
Signex Isopatch CPJ4 8J - Jack Silver Contacts - 48-Point
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and 48 x 1/4 inch type A female Jack connectors on the rear. This version features Gold contacts. Model pictured is silver contact version.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
Signex Lacing Bar LBK01
Allows to support the often heavy weight cables in the back of the Patch bays. Several possible configurations depending on the panels and their terminations. Attached to the Patch bay by four small screws (supplied) which can therefore be removed to facilitate handling during wiring and installation.
Compatible with all Signex Patchbays except the Q Patch.
Signex Isopatch CPJ48TG - Direct Solder Gold Contacts - 48-Points
The Signex Isopatch CPJ48TG is a patch bay with 48 1/4 inch type A jack sockets on the front panel and Direct solder terminations on the rear. This version features Gold contacts. Model pictured is Silver contact version.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
Universal Nylon Female XLR Module UPM04 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Teknosign DPS – High grade dual mic splitter
A passive splitter for two microphones, a must-have on every studio or stage, offering for three different outputs for each input channel. Two of them are completely isolated and the third is direct.
Thanks to DPS you can sent your microphone signal to 3 different and simultaneous destinations, without worrying of losing or wrecking the signal.
Strong and solid, like all the BoxLine Series, the DPS is ready to be up in most difficult situations with ease.
Signex Isopatch CPJ48 D25 - D-Sub Silver Contacts 48-Points
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and two DB25 connectors on the rear. This version features Silver contacts.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
The Signex Isopatch Bantam CPT96 D25 - 96 Point Gold Contacts is based on the same design that has made the Isopatch so popular, but uses the 4.4mm 'Bantam' Jack widely accepted in professional studios. The Bantam Jack, designed and built to withstand the heavy duty use encountered in a professional environment, offers superior contact performance in a much smaller space.
The twin Bantam Jack used in the Isopatch Bantam is of an enclosed design that helps to keep out the contaminants that shorten contact life, with spacing to accept twin 'stereo' plugs. Contacts are silver or gold plated phosphor-bronze with optional solid palladium switch contacts.
Signex Isopatch CPJ48 D25G - D-Sub Gold Contacts 48-Point
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and two DB25 connectors on the rear. This version features Gold contacts. Displayed model is the Silver contact version.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
Signex Isopatch CPJ48 J - Jack Silver Contacts 48-Points
The Signex Isopatch CPJ48D25G is a patchbay with 48 1/4 inch type A jack sockets on the front panel and 48 x 1/4 inch type A female Jack connectors on the rear. This version features Silver contacts.
The new Isopatch retains the design strengths of its predecessor, but now has 48 Jacks that are of a new, fully-enclosed design. The new Jack design helps to keep out the contaminants that shorten contact life, they also have a smart chromed ring which gives an improved 'feel' when plugging and un-plugging as well as looking pretty cool!
Signex MIDI Panel CPM22 M - DIN
Signex introduced the MIDI panel to provide a convenient method of localising MIDI interconnections and is a complement, rather than an alternative, to existing methods of MIDI signal routing, The Signex MIDI panel is simply a connector panel: it has no active circuitry and therefore requires no power supply. All sockets are uncommitted and connected only to their respective rear terminations. Any socket can therefore be used for MIDI In, Thru or Out connections.
Universal Brushed Metal Female Jack A 3 pole Module UPM10 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Teknosign XLR-ADAPTER provides the interconnection of 16 channels of XLR female to 16 channels on DB25 standard Tascam DB25 connectors, in a 19" frame 2 rack units. Connect quickly and easily your devices for a very affordable rate.
Universal Brushed Metal Female Jack A 3 pole Module UPM10 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Patch Module Female DIN 5 pôles UPM15 module for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Female RCA, gold, black insulator Module UPM16 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Female RCA, gold, Red insulator Module UPM17 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal BNC 75Ω Module UPM21 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal BNC 75Ω Module UPM25 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Signex Lacing Bar LBK01
Allows to support the often heavy weight cables in the back of the Patch bays. Several possible configurations depending on the panels and their terminations. Attached to the Patch bay by four small screws (supplied) which can therefore be removed to facilitate handling during wiring and installation.
Compatible with all Signex Patchbays except the Q Patch.
Signex Universal Panel - CPU16
The Signex Universal Panel is an empty panel with 16 channel windows that any of our UPM modules (XLR, RCA, Jack 1/4", MIDI 5 Broches DIN, BNC, Toslink, Blank) will fit into in any arrangement. The sockets fit firm with two small screws and have either solder or socket rear designations.
The Universal Panel is ideal for those with specific patching needs, or those with unusual patch sockets - the Universal Panel can also integrate with digital interfaces and hold new standard connection types like USB 2.0, Firewire and LAN.
Universal Metal Female XLR Module UPM01 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Metal Female XLR Module UPM02 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Nylon Female XLR Module UPM03 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.
Universal Nylon Female XLR Module UPM04 for Universal Panel CPU16. The sockets fit firm to the CPU16 with two small screws and have either solder or socket rear designations.