WesAudio Hyperion Eclipse

Main Features

	INNOVATIVE HARDWARE CIRCUIT HYPERION is fully analog device with +24 dBu of headroom. It’s innovative design utilizes 18 VCAs per channel. 4-BAND EQ • 4-Band EQ with switchable gain range for 5db or 15dB boost or cut per band: • High band – 2kHz to 25kHz (bell or shelf) • High-Mid band – 600Hz to 8Khz with full Q control • Low-Mid band – 200Hz to 2.5Khz with full Q control • Low band – 30 Hz to 350Hz (bell or shelf)
	OPERATING MODES HYPERION can operate in 3 different modes, including MS, which makes it perfect solution for multiple applications! • STEREO • DUAL MONO • MID-SIDE
	HIGH PASS FILTER The HPF has selectable 12dB/Oct or 6 dB/Oct slopes
	A BYPASS SWITCH PER BAND For easy comparison, each band can be independently bypassed, dialing new sounds in, has never been that easy!
	ADD COLOR TO YOUR MIXES THD stands for “Total harmonic distortion” and it allows to saturate your signal with beautiful analog color.
	HARDWARE A/B Even using _HYPERION as pure analog signal processor you can easily switch between two parallel settings with a magic of a simple buttons.

FLEXIBLE DAW / LIVE PLUG-IN control for instant recall
Stereo plugin which handles all modes of operation – Stereo/Dual Mono/Mid-Side
Mono plugin where two separate instances can connect to same hardware managing each channel separately
• IN/OUT metering with clip detection
• Flexible parametric EQ GUI
• Plugin comes in AAX/AAX DSP/VST3/VST2/AU

Features summary
• +24dBu of headroom
• Stereo / Dual mono / Mid/Side operation mode
• 4-Band EQ with switchable gain range for 5db or 15dB boost or cut per band:
• High band – 2kHz to 25kHz (bell or shelf)
• High-Mid band – 600Hz to 8Khz with full Q control
• Low-Mid band – 200Hz to 2.5Khz with full Q control
• Low band – 30 Hz to 350Hz (bell or shelf)
• HPF with 12dB/Oct or 6 dB/Oct slopes
• Each band features its own Bypass switch
• Essentially Noiseless parameter changes
• Proprietary THD implementation
• Flexible DAW/Live plug-in control for instant recall
• 12 touch sensitive encoders allows to record automation
• True bypass
• In and OUT metering with clip detection
• A/B compare feature

Specifications
• Frequency response: 10Hz-150kHz (-2dB)
• THD+N all bands gain “0”: 0.003% (1kHz,0dBu)
• THD+N +15dB band boost: <0.15% (1kHz,0dBu)
• Input impedance: 10kohm
• Output impedance: <100ohm
• Max signal level: +24dBu
• Crosstalk:< -100dB
• THD (MID switch): 1%
• THD (HIGH switch): 2.5%
• Power consumption: 150mA per rail
• Dimensions : 76x133x158mm
• Warranty: 2 years
• Unit needs to warm up for about 5 minutes before usage as its temperature
may affect some internal variables – like frequencies of each band, and very slightly gain and Q settings.
• Each band can boost or cut in configurable gain mode (It affects also OUTPUT control):
• 15dB boost or cut in 0.25 dB steps,
• 5dB boost or cut in 0.083 dB steps,
• Each frequency control has predefined amount of steps in logarithmic scale:
• HF frequency – 256 steps,
• HMF frequency – 256 steps,
• LMF frequency – 256 steps,
• LF frequency – 200 steps,
• HPF frequency – 128 steps.