Lindell Audio 17Xs MKII is a one channel transformer coupled compressor/limiter. It’s a FET (field effect transistor) design that incorporate some new and exclusive features such as ”High Pass Side-chain Filter”, ”Mix Knob” mix between dry and wet signal (parallel compression), ”Signal High Pass and Low Pass Filters” that colors the sound nicely.
The 17Xs is our take on the classic ”1176 Sound”. It can be smooth or it can be a rock’n'roll monster when using ratio 100:1 (all in).
GC Audio Riser compressor is a full signal chain processor offering 2 stages:
1 – Preamp stage of our RE-11 cartridge, compatible with Mic/Line levels
2 – Full VCA compressor from the brand's flagship, the Analog Riser
1) Preamp stage
Preamp Gain Step -6 dB to +68 dB
2) Compressor stage
• Threshold -30dB to +10dB
• Ratio 12 steps, 1.5 to 10
• Attack 0.5ms to 300ms
• Release 1.5ms to 1.5s
• Make up -20dB to +20dB
• Knee setting (Soft / Hard)
• Auto creator setting (automatic fast Attack and Release for transients)
Specifications
Gain Vs Frequency
Compressor Knees - Hard Knee Red, Soft knee Green
THD + N Vs Frequency
Data sheet
- Condition
- New
- Type
- VCA Compressor
- Application
- Tracking, Mixing & Mastering
- Channels
- Mono
- Format
- 19" Rack
- Chassis
- 2 U
- Quantity
- 1
Undertone Audio UnFairchild 670M II
The Fairchild circuit could be one of the most coveted and time tested compressors of all time. It has proven its extraordinary universal musicality for over 5 decades on countless genres of music. The beauty of its design is in its simplicity. The audio path, primarily consisting of only 2 transformers and 4 paralleled vari-mu tubes, can provide a gentle smoothing of levels or an explosive, energizing compression that will make any recording leap out of the speakers. The UTA UnFairchild is a painstaking recreation of the classic sound of this circuit.
WesAudio Timbre – Vari-mu Tube Compressor
As always It’s all about compression so we’ve created “Timbre” – an all tube vari-mu compressor based on the 6386 tube, inspired by the old, famous and much desired Gates STA-Level compressor. The Timbre is easy to use, full of color and sweetness. It is a vintage-style compressor made from the highest quality of components.
Augmenting the design, we have added new features like the third mode of operation with shorter attack time, a high-pass sidechain filter, a link for stereo operation and a bypass function. Timbre utilizes a novel programme controlled release circuit which creates density and consistency while minimizing typical compressor side-effects at up to 40dB of gain reduction!
VSC-3 QUAD DISCRETE COMPRESSOR COMBINE THE BEST OF MODERN HI-TECH, DESIGN WITH THE BEST SONICS OF THE PAST
ONE FOR ALL!
The Vertigo Sound VSC-3 is the legal successor of the VSC-2, which now is a modern classic and can be found in many top class studios around the world.
Vertigo Sound spent a lot of effort making a good product even better. The VSC-3 can do all the tricks the VSC-2 is known and loved for plus a bunch of new features and options.
WesAudio DIONE Analog BUS Compressor with Digital Recall
Legendary sound of Stereo Bus compressor has been true companion on countless recordings since 40 years. Often recognized as “mixbus glue”, this particular compression sound have become industry standard. We present _DIONE – fully analog, legendary VCA compressor with digital recall.
Overstayer Stereo Voltage Control Model 3722 is like having an entire mixing signal chain in a single rack space. It goes beyond the capabilities of a typical compressor/limiter and enables new sonic possibilities while streamlining workflow.
The SVC 3722 combines the gain control and punch of VCA gain cells, the warmth and character of our discrete analog Harmonics circuitry, and the sculpting power of an ultra-smooth 2-band shelving EQ. The SVC has dynamics control from fast peak limiting to smooth RMS compression, with multiple starting ratios and a Behavior control to create new and unique envelopes. Use the LEVEL control to drive into Harmonics to further bend transient peaks, adding musical harmonic color and cohesiveness as well as increasing apparent volume.
Buzz Audio Essence is a 500 Series version of the flagship SOC-1.1 opto compressor with a similar compression characteristic. The signal path uses Lundahl input and output transformers and our True Class A discrete amplifiers. This compressor is the only compressor on the market to offer a side chain insert point in the 500 Series format. In addition, on board side chain equalisation allows you to alter the sensitivity of the compressor at high and low frequencies - another unique feature of the Essence.
GC Audio Density compressor is a complete VCA Compressor.
The de-symmetrization stage consists of a Lundhal LL 1585 transformer which remains to this day the only way to perform common mode rejection without adding distortion. The follower OPA are ultra low noise AD797s recommended by That Corporation for optimal operation of the VCA.
Chandler Limited RS124 - EMI/Abbey Road Tube Compressor
The Chandler Limited RS124 Compressor is a recreation of one of the most coveted audio valve compressors of all time, the legendary EMI/Abbey Road RS124, reimagined for use in the modern studio environment.
The RS124, a “variable-mu” compressor circuit, was built for use at Abbey Road Studios, and was never commercially available until now.
Along with features traditionally found on the original counterparts, Input control, Output attenuation, ‘Recovery’ (release) control and the unique ‘HOLD’ setting, the Chandler Limited RS124 Compressor includes modern facilities such as adjustable attack, selectable output impedance, and a special twist, dubbed the ‘SuperFuse’.
The RS124 brings home the sound of a legend, reimagined for the modern era, today.
WesAudio RHEA tube Stereo Vari-Mu tube Compressor with digital recall
Main features
• 100% analog device with +24dBu of headroom
• True stereo tube “vari-mu” style compressor
• High voltage tube operation
• Input CARNHILL transformers
• Input and output level control for maximum flexibility
• Mix knob for parallel compression
• THD – harmonic distortion with two modes (Medium & High)
• SIDE CHAIN FILTERS – 3 high pass filters at 60,90 and 150 Hz
• 500 series and ng500 (e.g. _TITAN) series compatible
• Total Recall and plugin control compatible with most DAWs
• Analog automation in DAW
GC Audio revealed the Analog Riser - 5-stage processor for tracking, Mixing & Mastering
The GC Audio Analog Riser is a high-end dynamics and harmonics processor, which allows you to obtain sharp and unique dynamics and harmonics processing. It offers a unique sound signature for demanding engineers, right up to the mastering stage.
Several years of research and development have been necessary to create this analog processor so that it can be used in all areas of the audio business.
An uncompromising electronic design has been made to obtain an irreproachable sound quality.
The GC Audio Analog Riser will allow you to process sound with confidence and pleasure for recording, mixing and mastering.
The Standard Audio Level-Or MK2 is an agressive JFET limiter and harmonic distortion generator inspired by the Shure Level-Loc PA Limiter from the 60's and 70's. The MK2 version takes the original concept to a new level with improved performance and added features making it an extremely versatile studio tool.
WesAudio ngBusComp TRUE QUAD VCA THAT 2181 - Legendary sound of Stereo Bus compressor has been true companion on countless recordings since 40 years. Often recognized as “mixbus glue”, this particular compression sound have become industry standard. Now, we improve this design creating whole new level of versitality with unbeliveble modern DAW integration – We present ngBusComp – fully analog, dual mono, stereo, mid-side compressor, with digital recall.
First and most important point – ngBusComp is 100% analog device with +27dBu of headroom. Regardless its digital control nature, fully analog signal path provides top VCA compression sound.
Four THAT 2181 VCA in signal chain, and one in side chain detector for each channel!
STEREO / DUAL MONO compression! ngBusComp detectors can be linked and unlinked anytime – what allows us true bus compression behavior, as dual mono compression when needed!
Relative channel linking! Channels can be linked/unlinked anytime! It is allowed to have different settings on both channels and still manage those in a relative way!
We can work on Mid-Side mix separately for each channel, but if we would like to change balance of whole track, it is enough to engage “parameter link” and both channels Make Up gain will be adjusted relatively keeping same amount of volume difference!
MID-SIDE operation mode ngBusComp supports mid-side opeartion, you can give your side channel diffferent compression settings then middle channel!
Buzz Audio VELOX - Dual channel optical compressor
Taking over where Buzz Audio's classic SOC-1.1 left off, we announce the new VELOX dual channel optical recording compressor.
WesAudio ng76 Sterei Pair Two 100% analog FET compressors with digital controls
ng76 is a 100% analog processing unit with 24dBu of headroom. Regardless of its full digital control, the analog signal path provides lightning speed compression sound we all know from countless records.
Also available in mono version.
Chandler Limited Little Devil Compressor - 500 Series Compressor Module
The Chandler Little Devil Compressor uses all discrete circuits that combine Chandler's best designs with the hottest designs from the past, transformer balanced everything, and the American hand made quality you expect from Chandler, the LITTLE DEVILS will take the lunchbox UP to the next level...
Purple Audio ACTION is a FET compressor reminiscent of the MC77, designed to work in standard 500 racks.
The Action by Purple Audio features a constant impedance 600 ohm input attenuator feeding the input transformer, just like the MC77 units. This makes the input more resistant to overload by hot signals. After the input transformer, the signal is attenuated by the same gain reduction FET as in the MC77. The attenuated signal is buffered by a class A KDJ3 Op-Amp, which feeds the output fader. Lastly, the class AB KDJ4 output Op-Amp drives the custom hexafilar nickel and steel output transformer. The total gain (with no attenuation) is 45dB, just like the MC77.
ADR Compex F760X-RS-TX by Q2 Audio with Jensen transformer - balanced I/O
Renowned for decades by top engineers as the quintessential box for larger-than-life drum sounds! The ADR Compex F760X-RS may be the best compressor/limiter available for drum room mics and drum bus duties and is also highly sought-after for the character and punch it adds to guitars along with a myriad of other sources... And now it can be yours!
An excellent reissue of the ADR (Audio Design & Recording) F690 from the 70's, the machine that makes wonders on percussive sources (Drums, Percussion, Piano ...etc.) known for the sound of Led Zeppelin drums. This new version is identical to the original version, sounds the same but solves the recurring problems of the original machine, and offers a wider stereo image.
Dramastic Audio Obsidian 500 is derived from the 19" rack mount series Obisdian Stereo Compressor, but adds more flexibility with selectable high-pass filters. This 500 series version is also provided with a soft additional ratio of 1.5: 1. This module can also be completed with the Obisdian Dual Mono Expansion offering all dual mono features like independent L/R channels metering, a side-chain input crucial for some applications and a a duplication of the front panel controls.
Chandler Limited Zener Limiter - TG 12413 Zener Limiter
The EMI TG12413 Zener Limiter is the ultimate TG Limiter issued in celebration of the 75th birthday of Abbey Road Studios. The Zener Limiter was conceived by Chandler Limited designer Wade Goeke and is based on the vintage EMI circuits used to record The Beatles and Pink Floyd. This newest EMI Limiter continues the tradition of EMI Limiters started in 1956 with the RS114 tube limiter, and continued with the RS168 Zener Limiter in 1966, part of the TG12345 console channel in 1968 and TG12413 in 1974. The newest version borrows from the RS168 Zener Limiter and TG12345 console strip to make a new fully featured and flexible unit for modern use. It is interesting to note that the TG Limiter was originally designed to replace both the Fairchild 660 (Limit Mode) and the Altec 436 / RS124 (Comp 1 Mode)
The main reason for Zener Limiter reissue was to add features and flexibility to the powerful and vintage sounding TG limiter circuits. To that end Wade has added many new controls including switchable input impedance for hard of soft driving of the unit, 11 position attack, 21 position release, side chain filtering, and Comp1, Comp2, and Limit settings.
A simple Limiter from the rich past of EMI and Abbey Road has now come full circle into a modern powerhouse suitable for recording, mixing, and mastering. The rest is NEW Chandler Limited/EMI/Abbey Road history....
The Shadow Hills Dual Vandergraph is a direct descendant of the Shadow Hills Mastering Compressor and maintains its reputation of unquestionable quality and exceptional performance - in a 500 Series format. It’s inner workings are developed from the discrete gain cells of the Mastering Compressor which are combined with the Optograph’s extremely flexible Sidechain Filter matrix. This combination provides great possibilities for new recording techniques and the dynamic control.
The Standard Audio Stretch is a 500 Series, multi-band Compressor / Dynamics Processor unit based on noise reduction units from the 1970s and 1980s. Stretch emulates the sound of these classic units in their respective “encode” modes. However, the Stretch adds new features to employ this old trick in multitude of new ways.
Chandler Limited Germanium Compressor GCOMP - One Channel Germanium Compressor
The GERM Comp uses the same all class A amp found in the GERM Pre and Tone Control and is transformer balanced in and out. The Compression circuit uses a FET gain reduction element but with the tricks and flexibilty of all the GERM units. Some of the most notable additions include a WET/DRY mix (for "submixing" tracks within the comp), COMP CURVE (which selects the knee using various diode combinations), CLEAN/DIRTY COMP, and SIDECHAIN FILTER. Many of the GERM Comp parameters have been purposely set by studio use and listening, not by over analyzing them with test gear. The result is a musical powerhouse for ready for tracking, mixing, and mastering.
The Buzz Audio DBC-20 is a new take on a vintage technique utilizing a gain reduction element of silicon diodes in a balanced bridge arrangement. The diode bridge is coupled via a "radio steel" laminated transformer of our own design. This element produces a desirable compression character that can best be described as tight, colourful and rich with harmonics. In the style of compressors from the 60's, the DBC-20 incorporates a self-adjusting ratio whereby the compression ratio is progressively increased with deepening gain reduction. This feature allows for the control of very dynamic signals (such as vocals) in a seamless fashion. The DBC does sound very vintage but does not carry the vintage price tag!
The DBC-20 is available with a grey (silver) or black face plate.
WesAudio MIMAS 1176 Style Analog Compressor with Digital Recall
NEW IMPLEMENTATION OF A LEGEND
Since year 1968 this style of compression dominated hundreds of recordings and to this day it is most commonly used signal processor in the industry. Lightning-fast attack and release times became main companions of audio engineers. WesAudio proudly presents _MIMAS – ng500 series implementation of legendary FET compressor. This time along with classic analog sound You will receive most demanded feature in audio industry – DIGITAL RECALL.
Smart Research C1 Compressor is the original black front panel version of C2 compressor. (Two sets of controls and two audio channels, but no Sidechain inputs, or Crush facility). Popular in UK and US west coast studios.
A modded version with 2 high-pass filters and a Sidechain input, the C1t is also available.
Bettermaker Bus Compressor offers 100% analog signal path, Dry/Wet mix, sidechain with HPF, with hardware insert and preview function, adjustable THD saturation and more..
All this with high analog quality and recall with a speed of a native plugin.
• Advanced analog stereo VCA compressor with PEAK/RMS detection
• All parameters are digitally controlled via front panel and/or DAW (with dedicated plugin)
• Dry/Wet MIX control for parallel compression
• Sidechain high pass filter with hardware insert and preview function
• Adjustable THD for harmonically rich sound
• On-board measurement of PEAK/RMS levels
• 100% analog audio signal path
• Total recall and A/B comparison from your favourite DAW
• LED matrix display and six encoders with push-button action for ease of control
• USB connectivity with MAC/PC
Smart Research C2B offers an additional parallel compression stage to the standard C2, or a Blend function to the famous C2 VCA compressor by Alan Smart. The pot is located on the left of the front panel. The unit houses two independent mono compressors, in stereo mode, the left channel controls adjust the settings of both channels, so the right channel controls are no longer used, offering a real stereo operation. The C2M version has a set of controls and two audio channels for stereo use, while the C2R is a two-channel extension allows you to build a system with up to 8 channels controlled from a single C2 or C2M.
We love FET compression! In fact, some say we’re slightly obsessed with it. They might be right.
The Overstayer Stereo Field Effect Model 3706 Limiter/Compressor is an evolution of our passion for FET compressors and classic analog recording chains. The Stereo Field Effect, or SFE, is a stereo unit with ganged controls that combines compression and limiting, with analog tone shaping and harmonics stages to evoke the tonality of a classic analog recording and mixing chain.
Dramastic Audio Obsidian Stereo Comp TXIO
Through the use of several proprietary methods the Dramastic Audio Obsidian Stereo compressor performs a range of tasks unheard of from the average SSL or SSL-esque unit. The fist difference the user will notice is that the unit suffers no ‘shrinkage’ to the audio sound field. The highs stay brilliant and clear and the bottom will continue to thunder (especially with the unit’s internal High Pass Filter engaged on the unit’s detection circuit).
WesAudio DIONE STARLIGHT Black Face Limited Version
Legendary sound of Stereo Bus compressor has been true companion on countless recordings since 40 years. Often recognized as “mixbus glue”, this particular compression sound have become industry standard. We present _DIONE – fully analog, legendary VCA compressor with digital recall.
The Chandler Limited RS660 Compressor builds upon the technological advancements that began with the historic EMI RS124 and Fairchild 660 compressors used at EMI’s Abbey Road Studios during the 1960s, and distills them into a refined and elegant compression circuit…that is the RS660 Compressor. Rather than a reproduction of existing equipment, the RS660 Compressor stands apart and represents a path forward in the recording engineering development department.
Acme Audio Mfg. Co. is proud to introduce the OPTICOM XLA-500. Taking inspiration from the acclaimed XLA-3, Acme Audio has painstakingly squeezed the XLA-3’s topology into a convenient two space 500 series module. The XLA-500 is a tube optical audio limiter designed to produce a full range of non-linear, dynamic audio effects.
Q2 Audio F765 stereo Pair is the compression and limiting sections of the famous "Compex Limiter"™ built into a single 500 Series slot. The audio path contains the same blue Phillips type capacitors and BC series transistors as the original Compex.
Formatted after the vertical "N-Unit" with slight layout changes for enhanced usability, the F765 lives up to the reputation it's big brother, the F760X-RS, has made over decades of being a "secret weapon" on countless records.
Bettermaker Mastering Limiter 2.0
For over 7 years the Bettermaker Mastering Limiter has dominated the pro audio Mastering industry becoming an essential tool for Grammy winning Mix and Mastering engineers. It became a signature sound of Billboard hits as well as festival anthems being the last piece in the chain of the biggest artists in the world.
After countless hours of research in Bettermaker laboratories, it’s time for the next step. The modern legend has gotten even better, more powerful and more intuitive.
New mastering features, totally redesigned control screen and plugin, and presets from pro audio legends, the Limiter 2.0 is the ultimate tool to bring your music the final touch that it became famous for, but with extra kick.
The ADR Compex F760X-RS by Q2 Audio reintroduces, at long last, the venerable and highly sought-after dynamics processor of yesteryear. The unique character and spirit of the Compex can be heard on many classic recordings (think of that huge, commanding drum sound on When the Levee Breaks by Led Zeppelin, for instance). With painstaking attention to detail, Q2 Audio has masterfully reproduced the exact circuit design of the original Compex, with a handful of new features and updated components.
An excellent reissue of the ADR (Audio Design & Recording) F690 from the 70's, the machine that makes wonders on percussive sources (Drums, Percussion, Piano ...etc.) known for the sound of Led Zeppelin drums. This new version is identical to the original version, sounds the same but solves the recurring problems of the original machine, and offers a wider stereo image.
Smart Research C1t is the modified version of the venerable C1 you can find in most modern UK and West Coast recording studios. The C1t is upgraded with the following new features:
C1 Sidechain Modifications
These mods add a three position sidechain high pass filter switch to each channel, and a stereo, unbalanced external sidechain input connector on the rear panel. Using the switches to roll off low frequency signals feeding the sidechain can reduce compression slightly at low frequencies, but without effecting frequency response of the audio signal path. The external inputs can be used for various effects such as 'ducking' from a vocal or the overlap of 'a bass and a kick ... etc.
High Pass Filter switches
The upper toggle switch is for the left channel, and the lower switch for the right. The center position is off (no filter): up is 75Hz, or down is 150Hz high pass. The filters either work on the normal (internal) sidechain signal, or on an external signal if fed into the external jack input.
External Input
Added to rear panel. The stereo input connector is normalled to break the internal sidechain source when a jack is inserted.
The ACME Opticom XLA-3 MKIII is an optical audio limiter built to exacting military-style specifications, designed to produce a full range of non-linear, dynamic audio effects.
Buzz Audio SOC 1.1 The use of Light Dependent Resistors (LDR) as the control element of an audio compressor was pioneered in the 1960's and we are all aware of the value placed on those famous vintage "LA" units. The Buzz Audio SOC-1.1 was designed not to copy, but to take that signature and improve on it by offering the user more control. With 4 ratio settings, 3 attack options and 6 release times, the SOC-1.1 puts you in command of the dynamics rather than dealing with set parameters.
The Smart Research C2 The C2 compressor houses two independant mono compressors, or in STEREO mode, the left-hand controls operate both audio channels, with the right-hand controls not used, giving true Stereo operation. The C2M version has one set of controls and two audio channels for Stereo use, whilst the C2R is a dual channel remote expander for building up to 8 channel systems controlled from one C2M or C2.
The characteristic sound of this unit arises mostly from the fast response at the onset of compression, which when delayed to occur around the mid range attack settings (after 0.3 to 3 milliseconds) results in a window through which transients can still pass. When used accross a mix, or with any dynamic programme, this has the effect of adding 'punch', as the sidechain 'breathes' around these transients, while still controlling overall levels. CRUSH mode has been developed as an extension of this 'musicality', adding to and accentuating the factors involved in producing the character of the unit. CRUSH may sound surprising to those interested in more gentle applications, being capable of exaggerated compression effects, but in conjunction with the fast limit settings also introduced with this unit, it allows the C2 to be used for a much wider range of applications than the C1.
Also available with a parallel compression stage (Blend) check the Smart Research C2B
Looptrotter MONSTER COMPRESSOR 2 has been redesigned from the ground up to improve durability and sound quality. The Monster Compressor’s second generation features following upgrades:
• Grayhill switches with lifetime warranty
• 6N2P NOS military grade electron tubes
• Burr Brown Sound + integrated circuit components
• Intuitive, soft deesser (compressor mode) for warm, deep yet silky smooth sound
• Thick, heavy duty, coated aluminum front panel
Three independent devices of an original design in one piece
• FET Compressor / Limiter
• Tube saturation
• Mixer of dry and wet signal
Make the Monster Compressor 2 a very creative tool with great versatility, able to:
• Compress and warm up and punch up the sound
• Process subgroups, stems or just single tracks during tracking or mixing
• Master
McAudioLab OC1 - The Easy to Use Optical Compressor!
OC1 packs great compression into a simple 500 Series rack compatible module.
This mono compressor delivers many of the benefits typically associated with opto-cell providing you with satisfying warm and subtle smoothness.
Undertone Audio UNFa-1 Accessory Box
The UNFa-1 Accessory is an add-on to the UnFairchild 670m mkII vari-mu tube compressor/limiter. It adds a whole new world of flexibility and function to the already versatile recreation of the Fairchild circuit. There were certain features that didn’t make sense to have included in the UnFairchild design because it would have strayed too far from the mission of faithfully recreating the original Fairchild circuit. Being outside the boundaries of the original Fairchild circuit doesn’t make these new features any less desirable. An optional add on product was and is the perfect solution. With these added features, UnFairchild users can have an authentic hardware recreation of the legendary vintage musicality of an original Fairchild WITH a level of control and flexibility that many plugins don’t even offer. It is truly unfair.
EMPEROR 500 is an analog dynamics processor, which depending on the settings can work as a compressor, limiter or harmonics distortion generator. It was designed for creating the original, vivid, analog sound for instruments and voices.
Chandler Limited TG1 Limiter - Dual EMI Abbey Road Compressor/Limiter
The Chandler Limited TG1 is a recreation of the classic EMI TG12413 Limiter used in custom EMI and Abbey Road recording and mastering consoles from the late 60's. The TG Limiter was originally designed to be like the Fairchild 660/670 which was loved by many EMI engineers, including Geoff Emerick, but ended up with a very special sound all its own. These rare pieces were never commercially available and only EMI owned studios had access to them. Our version has been remade from the original design information and circuit board drawings as provided by Abbey Road and EMI to ensure extreme authenticity!
TG1 Updates & Modifications: Harmonic Distortion Function
Now standard on all Abbey Road Special Edition TG-1's, this option allows bypassing of the compressor/limiter threshold but leaves all circuits in the signal path, turning the unit into a powerful Harmonic Distortion generator capable of kicking out up to 2% Total Harmonic Distortion. That's more than 2 times the amount of analog tape! And all with 100% discrete transformer balanced circuits. Adjust the input for amount of THD and the output to match level. Try running Distortion on one channel and hard limiting on the other. The ultimate in retro! This option is placed on the front panel of the unit with a toggle switch for each channel.
Buzz Audio SOC-20 - Mid side pro-audio compressor
A dual channel precision optical compressor optimized for the stereo buss with features not found on any other LDR compressor manufactured today.
Buzz Audio SOC-M - Mastering optical compressor
A precision stereo optical compressor optimized for analogue mastering featuring a mid side matrix and a balanced side chain insert point.
The SOC-M is available with a grey (silver) or black face plate.
CHANDLER LIMITED TG Opto Compressor - 500 Series Optical Compressor
The Chandler Limited TG Opto compressor is a handmade, fully discrete, mono, dual space module, designed for the 500 Series format.
The TG Opto for 500 Series is a relative of the TG1 Opto, found in Chandler Limited’s TG Microphone Cassette, the TG1 Limiter and Zener Limiter, and traces its lineage to the historic EMI TG12413 limiters found on the TG12345 mixing and mastering consoles of the late ‘60s and early ‘70s.
The TG Opto compressor control-set includes: selectable sharp and rounded knees, continuous input, output (makeup gain), attack, release, and true bypass.
GC Audio Riser Color is a complete creative module offering 3 stages:
1- Preamp stage of our RE-11 cartridge, compatible with Mic/Line levels
2- Harmonic treatment stage of the brand's flagship: the Analog Riser
3- The saturator stage of our flagship: the Analog Riser
1) Preamp stage:
Gain Step -6 dB to +68 dB
2) Harmonic Stage:
• Harmonic generator setting
• Harmonic mix density setting
3) Tube Stage:
• Gain setting
• Saturator setting
• 4 stages of 12AU7
GC Audio Inherit Rack + RE 11 Cartridge a reissue of the preamplifier of the famous British mixing board, the SSL 4K E Series. Many improvements have been made to achieve better results.Low noise Operational amplifier
- Ultra low noise integrated preamp.
- Integrated balancing IC
- Great care on PCB Routing.
We recommend it for sound engineer looking for very clean recording with very low distortion and/or very high gain requirements.
GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or Tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.
Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:
- RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
- RE 11: Modern, high-gain monolithic preamplifier
- RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
- RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
- RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
- RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
- Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
- Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
- GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
- Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
- Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
- Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
GC Audio RE 11 cartridge Limited Edition for the Inherit Rack is a modern and high gain monolithic preamplifier.
- Ultra low noise integrated preamp
- Integrated balancing IC
- Great care has been taken on PCB Routing
We recommend it for sound engineer looking for very clean recording with very low distortion and/or very high gain requirements.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
You can get the RE 11 free if you order a Bundle of Inherit Rack + any of the 8 other available Cartridges
GC Audio revealed the Analog Riser - 5-stage processor for tracking, Mixing & Mastering
The GC Audio Analog Riser is a high-end dynamics and harmonics processor, which allows you to obtain sharp and unique dynamics and harmonics processing. It offers a unique sound signature for demanding engineers, right up to the mastering stage.
Several years of research and development have been necessary to create this analog processor so that it can be used in all areas of the audio business.
An uncompromising electronic design has been made to obtain an irreproachable sound quality.
The GC Audio Analog Riser will allow you to process sound with confidence and pleasure for recording, mixing and mastering.
GC Audio Realism Preamp a high-end Class A 500 Series Preamp with combo connector on the front panel for Mic/Instrument input.
A great care has been taken is selecting the best components to achieve a very quiet preamp like ultra low noise transistors, very quiet Op-Amps, Coupling/decoupling link optimized for impulse response, High-end Lundahl transformer, front panel switched driven by gold contact relays.
GC Audio Inherit Rack + RE 15 Cartridge an ultra low noise preamp reissue of the famous British mixing board, the Mozart RN15, having received the following improvements:
- SSM2212 twin transistors with very low noise
- Low noise Op-Amps
- Great care taken with the PCB routing
Recommended if you are looking for a very quiet and neutral preamp.
GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.
Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:
- RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
- RE 11: Modern, high-gain monolithic preamplifier
- RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
- RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
- RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
- RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
- Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
- Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
- GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
- Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
- Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
- Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
GC Audio Inherit Rack + Graham Langley Cartridge co-founder of Amek and designer of many large format mixing consoles (Amek Mozart, Rembrandt, Angela, ... etc.).
A premium differential preamp composed of paired transistors and constant current sources. The unit is digitally controlled to isolate the analog signal path in the metallic cartridge (and therefore separated from the radiation of the linear PSU). Common mode rejection and output balancing are manually calibrated to achieve optimized values. The resistive ratios are composed of low value in order to obtain an optimal EIN.
This preamp is perfect for user needing uncompromising sound pickup with a transparent and powerful result.
GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.
Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:
- RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
- RE 11: Modern, high-gain monolithic preamplifier
- RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
- RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
- RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
- RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
- Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
- Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
- GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
- Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
- Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
- Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.
The Inherit Rack offers the following common features to all compatible cartridges:
- 12-step gain control
- Adjustable output gain level
- 10-segment LED VU meter with PRE/POST switch
- +48V phantom power
- Phase inversion
- -20dB PAD
- DI Instrument passive input
- 80Hz and 120Hz high pass filters with OFF position - Slope 12dB/Octave
Currently, 9 cartridges are available (more coming soon). They all offer a class A circuit:
- RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
- RE 11: Modern, high-gain monolithic preamplifier
- RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
- RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
- RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
- RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
- Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
- Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
- GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
The GC Audio The Tube Heat Cartridge a genuine vaccum tube preamplifier inspired by famous vintage tube preamps.
- Twin high voltage ECC82, no discrete component in the signal path, balancing and unbalancing by transformers
- The goal is to obtain all the warmth that this technology allows in order to obtain a very colorful sound. We recommend it especially on vocals
- In addition, by raising gain and lowering the output volume to stay on an output level below 0 dB Vu,
By raising input gain and lowering the output volume to stay below 0 dB Vu, you can obtain a nice analog saturation without overloading your converters. This cartridge is a real creative tool.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
The GC Audio RE 98 cartridge is a reissue of famous British mixing console preamplifier from the 90s, the Amek 9098 designed by Rupert Neve / Graham Langley. Many improvements have been made to achieve better results:
- Ultra low noise SSM2212 paired transistors
- Ultra low noise Operational amplifier: OPA1612
- Great care taken to the PCB Routing
- Lundhal 1585 balancing
We recommend it for audio engineers looking for very quiet and clean recording with a subtle coloration on the top end.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
The GC Audio RE 15 cartridge is an overall ultra low noise preamplifier of a famous British mixer from the 90s, the Mozart RN15 designed by Rupert Neve / Graham Langley.
- Ultra low noise SSM2212 paired transistors.
- Low noise Operational amplifier.
- Great care on PCB Routing.
We recommend this cartridge to audio engineers looking for very quiet and clean Mic Pre.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
The GC Audio RE 73 cartridge for Inherit Rack is a reissue of preamplifier came out of the legendary British preamplifier, the NEVE 1073.
Many improvements have been made to achieve best features
- Ultra Low noise transistor.
- Great care on PCB Routing.
- Carnhill VTB9045 High End shield version tranformer
- Digital gain control
We recommend it for sound engineer looking for very punch and coloration recording.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
The GC Audio RE 4K cartridge for the Inherit Rack is a reissue of the preamplifier of the famous British mixing board, the SSL 4K E. Many improvements have been made to achieve better results.Low noise Operational amplifier
- Great care on PCB Routing
- Original Jensen 115 transformer balanced
- Output symmetry manually calibrated to achieve optimized values
We recommend it for sound engineer looking for very punch recording and warmth on low frequency.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
GC Audio Langley Inherit Cartridge
GC Audio introduce a new preamp cartridge designed by Graham Langley, co-founder of Amek and designer of many large format mixing consoles (Amek Mozart, Rembrandt, Angela, etc...) in collaboration with Rupert Neve.
This new design, exclusive to the Inherit system, has been conceived to make the best use of the resources offered by the reception rack. The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.
GC Audio Density compressor is a complete VCA Compressor.
The de-symmetrization stage consists of a Lundhal LL 1585 transformer which remains to this day the only way to perform common mode rejection without adding distortion. The follower OPA are ultra low noise AD797s recommended by That Corporation for optimal operation of the VCA.
The GC Audio Rack 500 is a high-end 10 slot chassis with external power supply, compatible with all standard 500 series modules. The external linear power supply has a total capacity of 12 Amps (6A for the +16V circuit and 6A for the -16V circuit) which makes it the most powerful 500 rack on the market. It easily powers the most demanding modules by regulating them and filtering noise and parasites generated by the 50/60Hz AC current. The chassis is made of 1.5mm thick steel, 50% thicker than other 500 racks on the market, offering excellent shielding against electromagnetic radiation for optimal isolation of the 500 modules it receives.
Rack 500 is also available without external power supply.