GC Audio Riser Color Cartridge

GC Audio Inherit Rack + RE 11 Cartridge a reissue of the preamplifier of the famous British mixing board, the SSL 4K E Series. Many improvements have been made to achieve better results.Low noise Operational amplifier

• Ultra low noise integrated preamp.
• Integrated balancing IC
• Great care on PCB Routing.

We recommend it for sound engineer looking for very clean recording with very low distortion and/or very high gain requirements.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or Tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio RE 11 cartridge Limited Edition for the Inherit Rack is a modern and high gain monolithic preamplifier.

• Ultra low noise integrated preamp
• Integrated balancing IC
• Great care has been taken on PCB Routing

We recommend it for sound engineer looking for very clean recording with very low distortion and/or very high gain requirements.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

You can get the RE 11 free if you order a Bundle of Inherit Rack + any of the 8 other available Cartridges

GC Audio revealed the Analog Riser - 5-stage processor for tracking, Mixing & Mastering
The GC Audio Analog Riser is a high-end dynamics and harmonics processor, which allows you to obtain sharp and unique dynamics and harmonics processing. It offers a unique sound signature for demanding engineers, right up to the mastering stage.

Several years of research and development have been necessary to create this analog processor so that it can be used in all areas of the audio business.

An uncompromising electronic design has been made to obtain an irreproachable sound quality.

The GC Audio Analog Riser will allow you to process sound with confidence and pleasure for recording, mixing and mastering.

GC Audio Realism Preamp a high-end Class A 500 Series Preamp with combo connector on the front panel for Mic/Instrument input.

A great care has been taken is selecting the best components to achieve a very quiet preamp like ultra low noise transistors, very quiet Op-Amps, Coupling/decoupling link optimized for impulse response, High-end Lundahl transformer, front panel switched driven by gold contact relays. 

GC Audio Inherit Rack + Tube Heat a genuine vaccum tube preamplifier inspired by famous vintage tube preamps.

• Twin high voltage ECC82, no discrete component in the signal path, balancing and unbalancing by transformers
• The goal is to obtain all the warmth that this technology allows in order to obtain a very colorful sound. We recommend it especially on vocals
• In addition, by raising gain and lowering the output volume to stay on an output level below 0 dB Vu,

By raising input gain and lowering the output volume to stay below 0 dB Vu, you can obtain a nice analog saturation without overloading your converters. This cartridge is a real creative tool.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack + RE 15 Cartridge a reissue of the famous British mixing board's preamp, the NEVE VR.
Many improvements have been made to achieve better results.

• Low noise Op-Amps
• Great care on PCB Routing
• Original Belclare TF10015 transformer balanced
• Output symmetry manually calibrated to achieve optimized values

Recommend for very punch recording and warmth on low end.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack + RE 98 Cartridge a reissue of famous British mixing console preamplifier from the 90s, the Amek 9098. Many improvements have been made to achieve better results:

• Ultra low noise SSM2212 paired transistors
• Ultra low noise Operational amplifier: OPA1612
• Great care taken to the PCB Routing
• Lundhal 1585 balancing

Recommended for very quiet and clean recording with a subtle coloration on the top end.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack + RE 73 Cartridge a reissue of preamplifier came out of the legendary British preamplifier, the NEVE 1073.

Many improvements have been made to achieve best features

• Ultra Low noise transistor.
• Great care on PCB Routing.
• Carnhill VTB9045 High End shield version tranformer
• Digital gain control

Recommended for very punch and coloration recordings.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack + RE 4K Cartridge a reissue of the preamplifier of the famous British mixing board, the SSL 4K E Series. Many improvements have been made to achieve better results.Low noise Operational amplifier

• Great care on PCB Routing
• Original Jensen 115 transformer balanced
• Output symmetry manually calibrated to achieve optimized values

Recommended for very punch recording and warmth on low end.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or Tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack + RE 15 Cartridge an ultra low noise preamp reissue of the famous British mixing board, the Mozart RN15, having received the following improvements:

• SSM2212 twin transistors with very low noise
• Low noise Op-Amps
• Great care taken with the PCB routing

Recommended if you are looking for a very quiet and neutral preamp.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack + Graham Langley Cartridge co-founder of Amek and designer of many large format mixing consoles (Amek Mozart, Rembrandt, Angela, ... etc.).

A premium differential preamp composed of paired transistors and constant current sources. The unit is digitally controlled to isolate the analog signal path in the metallic  cartridge (and therefore separated from the radiation of the linear PSU). Common mode rejection and output balancing are manually calibrated to achieve optimized values. The resistive ratios are composed of low value in order to obtain an optimal EIN.

This preamp is perfect for user needing uncompromising sound pickup with a transparent and powerful result.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

Currently, 12 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage
• Color Riser: module créatif complet offrant 3 étages de préamplification micro/ligne, traitement harmoniques et saturation à lampes
• Compressor Riser: ue chaine complète de processeur de signal offrant 2 étages de préamplification micro/ligne et le presseur VCA complet de l'Analog Riser
• Equalizer Riser: ue chaine complète de processeurs de signal offrant 2 étapes, Préamplification  micro/ligne et égaliseur paramétrique 3 bandes issu de l'Analog Riser

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Inherit Rack is an innovative modular microphone and instrument preamplifier that allows, thanks to different Hot-swappable Solid State or tube cartridges, to benefit from several types of preamplifiers, offering different tones and sound characters, in a single 2U 19" rack allowing to compare a wide range of sounds instantly.

The Inherit Rack offers the following common features to all compatible cartridges:
- 12-step gain control
- Adjustable output gain level
- 10-segment LED VU meter with PRE/POST switch
- +48V phantom power
- Phase inversion
- -20dB PAD
- DI Instrument passive input
- 80Hz and 120Hz high pass filters with OFF position - Slope 12dB/Octave

Currently, 9 cartridges are available (more coming soon). They all offer a class A circuit:

• RE 15: Reissue of the Amek RN15 preamp, unbalanced and balanced by a very low noise Op-Amp
• RE 11: Modern, high-gain monolithic preamplifier
• RE 73: Reissue of the Neve 1073 preamp, unbalanced and balanced by an original Carnhill VTB9045 shielded transformer
• RE 98: Reissue of the Amek 9098 preamp, very low noise discrete components, balanced by Lundahl 1585 transformer
• RE VR: Improved reissue of the NEVE VR console preamp, de-balanced with a rebuilt Original TF10015 transformer, preamplified and balanced with a very low noise Op-Amp
• RE 4K: Reissue of the SSL 4K E Series preamp, unbalanced by an original Jensen 115 transformer, preamp balanced by very low noise Op-Amp
• Tube Heat: true high voltage tube preamp, unbalanced by transformer, no discrete components in the signal path
• Graham Langley: Designed in collaboration with Graham Langley to create a preamp offering the most focused and accomplished preamp with its own unique signature, using the unique capabilities of the Inherit system
• GY 4.5: Genuine tube preamplifier: Coming with two ECC82 running on high voltage

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The GC Audio The Tube Heat Cartridge a genuine vaccum tube preamplifier inspired by famous vintage tube preamps.

• Twin high voltage ECC82, no discrete component in the signal path, balancing and unbalancing by transformers
• The goal is to obtain all the warmth that this technology allows in order to obtain a very colorful sound. We recommend it especially on vocals
• In addition, by raising gain and lowering the output volume to stay on an output level below 0 dB Vu,

By raising input gain and lowering the output volume to stay below 0 dB Vu, you can obtain a nice analog saturation without overloading your converters. This cartridge is a real creative tool.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The GC Audio RE VR cartridge for the Inherit Rack is a reissue of the famous British mixing board's preamp, the NEVE VR.
Many improvements have been made to achieve better results.

• Low noise Op-Amps
• Great care on PCB Routing
• Original Belclare TF10015 transformer balanced
• Output symmetry manually calibrated to achieve optimized values

We recommend it for sound engineer looking for very punch recording and warmth on the low end.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The GC Audio RE 98 cartridge is a reissue of famous British mixing console preamplifier from the 90s, the Amek 9098 designed by Rupert Neve / Graham Langley. Many improvements have been made to achieve better results:

• Ultra low noise SSM2212 paired transistors
• Ultra low noise Operational amplifier: OPA1612
• Great care taken to the PCB Routing
• Lundhal 1585 balancing

We recommend it for audio engineers looking for very quiet and clean recording with a subtle coloration on the top end.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The GC Audio RE 15 cartridge is an overall ultra low noise preamplifier of a famous British mixer from the 90s, the Mozart RN15 designed by Rupert Neve / Graham Langley.

• Ultra low noise SSM2212 paired transistors.
• Low noise Operational amplifier.
• Great care on PCB Routing.

We recommend this cartridge to audio engineers looking for very quiet and clean Mic Pre.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The GC Audio RE 73 cartridge for Inherit Rack is a reissue of preamplifier came out of the legendary British preamplifier, the NEVE 1073.

Many improvements have been made to achieve best features

• Ultra Low noise transistor.
• Great care on PCB Routing.
• Carnhill VTB9045 High End shield version tranformer
• Digital gain control

We recommend it for sound engineer looking for very punch and coloration recording.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The GC Audio RE 4K cartridge for the Inherit Rack is a reissue of the preamplifier of the famous British mixing board, the SSL 4K E. Many improvements have been made to achieve better results.Low noise Operational amplifier

• Great care on PCB Routing
• Original Jensen 115 transformer balanced
• Output symmetry manually calibrated to achieve optimized values

We recommend it for sound engineer looking for very punch recording and warmth on low frequency.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Langley Inherit Cartridge
GC Audio introduce a new preamp cartridge designed by Graham Langley, co-founder of Amek and designer of many large format mixing consoles (Amek Mozart, Rembrandt, Angela, etc...) in collaboration with Rupert Neve.

This new design, exclusive to the Inherit system, has been conceived to make the best use of the resources offered by the reception rack. The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

The proprietary Inherit format keeps the sensitive part of the electronic design in a one-piece machined cartridge that acts as a Faraday cage to offer optimal electromagnetic shielding performance.

GC Audio Density compressor is a complete VCA Compressor.
The de-symmetrization stage consists of a Lundhal LL 1585 transformer which remains to this day the only way to perform common mode rejection without adding distortion. The follower OPA are ultra low noise AD797s recommended by That Corporation for optimal operation of the VCA.

The GC Audio Rack 500 is a high-end 10 slot chassis with external power supply, compatible with all standard 500 series modules. The external linear power supply has a total capacity of 12 Amps (6A for the +16V circuit and 6A for the -16V circuit) which makes it the most powerful 500 rack on the market. It easily powers the most demanding modules by regulating them and filtering noise and parasites generated by the 50/60Hz AC current. The chassis is made of 1.5mm thick steel, 50% thicker than other 500 racks on the market, offering excellent shielding against electromagnetic radiation for optimal isolation of the 500 modules it receives.

Rack 500 is also available without external power supply.