Buzz Audio Kick

DYNAMIC RATIO POWER
Our unique side chain design re-creates the style of compressors from the 60's (think Fairchild) whereby the compression ratio is progressively increased with deepening gain reduction. So as the input signal increases past threshold, the ratio will vary from 1:1 right up to 15:1. This feature allows for the control of very dynamic signals (such as vocals) in a seamless fashion and is also a very desirable characteristic when used on complex percussive material such as the drum buss and drum loops.

OPERATIONAL EASE
This compressor is easy to get happening with six switched attack and release times covering a wide range, including an interesting auto release mode. Rotary controls are provided for the amount of compression and the output gain. The compressor can be switched to a Soft mode whereby dynamic peaks are partially retained. The bass function introduces a high pass filter to the side chain to lower compression sensitivity at low frequencies which is useful on the mix bus and the fast response hi-resolution 15 LED bar graph meter accurately displays gain reduction.

CONTROLS and FUNCTIONS
• GAIN - this control adjusts the output makeup gain of the compressor.
• COMP - clockwise rotation of this control increases the amount of compression.
• ATTACK - rotary switch with 6 settings, FAST (less than 0.5mS)-5mS-10mS-15mS-25mS-50mS.
• RELEASE - rotary switch with 6 recovery time settings, 50mS-100mS-200mS-400mS-600mS and AUTO.
• LINK - two Kick compressors can be side chain linked for stereo operation.
• SOFT - adds dynamics in soft mode for times when lighter compression is desired.
• BASS - reduces compression sensitivity at low frequencies for more bass punch, approx 8dB at 100Hz.
• ENGAGE - this switch is used to engage or hardwire bypass the compressor.

SPECIFICATIONS
• Maximum Input Level; +27dBu
• Maximum Output Level; +27dBu
• Noise; -80dBu (measured A Weighted with no make up gain applied)
• Gain; variable 0dB to +15dB
• Frequency Response; 6Hz to 400kHz measured no gain reduction
• Harmonic Distortion; At +10dBu input level, no gain reduction; 0.28% @ 100Hz, 0.25% @ 1kHz, 0.15% @ 10kHz
• Harmonic Distortion; With 10dB gain reduction (Release set to 400mS); 1.5% @ 100Hz, 0.5% @ 1kHz, 0.5% @ 10kHz
• Standard Operating Level; +4dBu
• Size; (37Wx132H). Fits 1 space in API 500 series rack format
• Power requirements; 100mA +/- 15-18 volts DC, as supplied by frame power supply

Specifications are typical of a production unit and are subject to change without notice. 0dBu reference = 0.775 volts RMS