Burl Audio BAD4M NextGen

The BURL Audio B2 Bomber DAC is the result of tireless digital to analog research and development. As a result the B2 DAC features unique class-A, discrete op-amps with passive filtering. This makes the B2 DAC ideal for monitoring. Couple this with state of the art conversion technology and the B2 Bomber DAC delivers sonic purity and dynamics thus far unheard of.

The B2 Bomber DAC Nextgen comes with the Ethernet port dedicated to the Dante protocol, but will only be active once the Dante card is inserted. Need Dante? Order the B2 Bomber DAC Dante Nextgen.

Burl Audio BMB1 DIGILINK MOTHERBOARD
The BMB1 Motherboard for B80 & B16 Mothership chassis comes standard with two DigiLink connectors for direct hookup to Avid Pro Tools. BURL AUDIO does away with the expansion port, making both primary ports. That means you can play 64 ADC or DAC channels straight out of Pro Tools with one unit!  With 6 BAD8s and 4 BDA8s a 48×32 IO can be achieved.  With 2 BAD8s and 8 BDA8s a 16×64 IO can be achieved.  With the configurability of the MOTHERHSHIP the IO possibilities are limitless.

Ensemble de convertoisseurs BURL Audio B2 Bomber ADC + DAC tous deux munis d'atténuateur analogique.

La meilleure opportunité de vous offrir des convertisseurs très haut de gamme et une horloge maitre exceptionnelle intégrée.

The RME HDSPe MADI is RME's both inexpensive and outstanding PCI Express card with MADI interface. HDSPe MADI is based on the award-winning HDSP MADI card, and represents the new top model of this world-wide successful card line.

The PCI Express card consequently uses all advantages of the MADI format, the professionals' multi-Channel audio interface, offering 64 channels of 24-bit audio at a sample rate of up to 48 kHz, 32 channels at up to 96 kHz and 16 channels at up to 192 kHz. Transmission is done via a single line, either coaxial with BNC plugs or by fiber cable. In both cases more than 100 m cable length can be achieved.

WesAudio CALYPSO NG500 / 500 Series Audio Interface
CALYPSO is an audio interface designed to work in 500 series enclosure. It features state of art 8 channels of AD/DA conversion and perfectly integrates with ng500 chassis – _TITAN, through I.A.C. connector. Besides its very convenient integration with ng500 chassis, it still can be used in standard 500 series enclosure using two DB25 connectors.

Henry Engineering USB Matchbox II is a professional USB-to-XLR multi-mode stereo audio codec. It provides unparalleled audio performance with the ease of USB connectivity. The USB Matchbox II is ideal wherever computer audio needs to interface with a professional analog or digital audio system. The USB Matchbox II provides balanced analog inputs and outputs, an AES/EBU digital output, plus a Headphone output for monitoring. The USB Matchbox II solves the myriad of problems caused by using common sound cards in a broadcast or professional audio environment.

Burl Audio BCLK Word Clock and AES distribution card for the Mothership B80

Henry Engineering LogiConverter is a general purpose control interface that eliminates the incompatibility between various audio and video equipment remote control circuits.

LogiConverter has 4 opto-isolated inputs that control 4 isolated relay outputs. The unit can be programmed to provide either latched or momentary outputs from either continuous or momentary inputs with up to 24 combinations possible. A single input can provide single or dual "flip-flop" outputs; two inputs can latch and reset an output.

The RME HDSPe MADI FX marks a new milestone both in the history of audio interface cards in the past two decades and within the long series of outstanding RME devices. Never before has such a high-performance multi-channel audio system existed.

The HDSPe MADI FX features 390 audio channels! Three MADI I/Os - two optical and one coaxial are accompanied by one AES/EBU I/O and one analog monitoring output. To complete the feature set, a Word Clock connection and four MIDI I/Os were added. The complete technology and connectivity are highly integrated into the smallest possible amount of space - typical for RME. Only one PCIe slot is required on the motherboard, plus one free slot opening on the case.

BURL Audio BMB4 features an Ethernet port for 64 IO channels of Waves SoundGrid connectivity.  SoundGrid is an Audio-over-Ethernet networking and processing technology developed by Waves. SoundGrid provides extremely low-latency, high-channel-count audio processing using standard Intel CPUs and 1 Gbps Ethernet networks for studio, live sound, and other real-time professional audio applications.

The BMB4 motherboard is provided as desired, to be specified when ordering a B16 & B80 Mothership chassis, like  any of all the other available motherboards (BMB1, BMB2, BMB3, BMB5 and BMB6). The price is only for those who would like to order an additional motherboard.

Hear Technologies Switch Back M8RX - A Preamp and Multi-channel Headphone Monitoring Interface
With intuitive design and robust capabilities, the Switch Back M8RX™ is actually two products in one. This gives the musician a choice to play live, record, or monitor their mix all in one single tool.

The M8RX is a personal interface to be used for live sound or recording, and also a multi-channel headphone monitoring system. While compact in size, the M8RX gives individuals options to use it in multiple ways, such as a mini recording studio setup or a simple communication system.

Burl Audio BDA8 NextGen, 8-channel analog-to-digital daughter card for the B80 and B16 MOTHERSHIP is the result of over 25 years of R&D D/A design experience.  Following on the overwhelming success of the B2 BOMBER ADC and the BDA8 employs a next generation analog circuit path and the latest in analog to digital conversion.  This is a no compromise design utilizing all class-A, discrete transistor circuitry and the legendary BX1 transformer coupled input.  The BDA8 benefits from the new form factor of the BX1 transformer, allowing for more channel density.  The BDA8 also boasts the latest analog-to-digital conversion technology giving it great tone with even greater detail and amazing low latency.

Burl Audio B22 ORCA Control Room Monitor Mothership Daughter Card.
Building on the reputation of the B26 ORCA for sonic superiority, BURL Audio introduces the ultimate in control room monitoring for the B16 and B80 Mothership, the B22 ORCA Control Room Monitor daughter card. The B22 ORCA utilizes the same analog, all-discrete circuit path philosophy as other BURL Audio products with an emphasis on the ultimate in sonic transparency and 3D stereo imaging. Featuring the BURL NextGen BOPA14 op-amps, the B22 delivers tight bass and high definition throughout the audio spectrum. Instruments and mixes have a more real, 3D sound, with wider stereo image and even more depth while preserving the original shape and harmonic balance of the source. The B22 ORCA employs 4 DAC channels. The first two are mix/mastering grade DAC channels with switchable BX5 output transformers. These channels can be used to feed a separate headphone amp or a mix/mastering chain. You can also use these channels to send out tracks for analog processing. The second two DAC channels feed the main monitor section which features two stereo speaker outputs and one stereo headphone output. Couple the new B22 ORCA Control Room Monitor daughter card with a B16 Mothership and a B4 MIC/LINE input card and you have an amazing audiophile desktop recording rig. Or, combine the B22 ORCA with a B16 and a BAD4M and you have the ultimate 4 in x 4 out mastering solution. Evolve your listening, mixing and mastering through the B22 ORCA Control Room Monitor and give you and your ears a competitive advantage.

The BURL Audio B2 Bomber ADC is the most significant piece of audio gear in your studio, and you don’t even own it yet. You’ve spent a fortune on great mics, great mic pres, and a kick ass DAW, but unfortunately you are missing one key component; an ADC with an audio path worthy of your recordings.

Open up your best mic pre and look inside. You will see high quality components like tubes, large transformers and high quality capacitors. Open up your ADC and you will find cheap 10 cent capacitors and run-of-the-mill 25 cent op-amps, even when you’ve spent a lot of money on your interface. Most DAW hardware interfaces are designed for inter-connectivity with little attention to the analog audio path, or even the conversion, let alone the tone.

Henry Engineering TwinMatch is a dual-stereo (4-channel) level and impedance converter that interfaces two “consumer” stereo outputs with professional balanced equipment.

TwinMatch is ideal for use with a pair of stereo CD players or other "play only" sources. The unit accepts four channels (2 stereo pairs) of -10 dBv unbalanced audio and converts to professional "600 ohm" balanced lines. The gain is adjustable to accommodate either +4 or +8 dBm systems.

Burl Audio BMB2 MADI MOTHERBOARD
The BMB2 Motherboard for B80 & B16 Chassis features two optical MADI ports for use with ASIO (Windows) or CORE AUDIO (Mac) PCIe MADI cards. With two optical ports, 64in/64out at 44.1k, 48k, 88.2k, 96k, and 32in/32out at 176.4k, and 192k are supported. With 6 BAD8s and 4 BDA8s a 48×32 IO can be achieved.  With 2 BAD8s and 8 BDA8s a 16×64 IO can be achieved.  With the configurability of the MOTHERHSHIP the IO possibilities are limitless. 

Burl Audio BMB6 features 8 channels of AES/EBU I/O connectivity. Designed exclusively for the B16, the BMB6 provides an easy interface to any AES/EBU device. If you don’t need high channel count, the B16 with the BMB6 is a great way to go. The the B16-BMB6 with a BAD8 and BDA8 is an amazing 8 channel I/O. The B16-BMB6 with a BAD4M and a BDA4M with switchable input and output transformers is an incredible 4 channel I/O solution for mastering.

Henry Engineering TALENTPOD II MIC & HEADPHONE CONTROLLER
Doing any remote broadcast is a lot of work.  Doing a sports remote with multiple announcers can be a real hassle!  You need to provide headphones for each announcer.  AND you need to mix Return (IFB or “back-haul”) into the local headphone feed.  AND each announcer wants a different mix…OR “can you put the IFB in my right ear only?”….OR some announcers don’t want to hear IFB at all….OR they want more volume… OR less volume!  WHAT A HEADACHE… You end up with a maze of equipment and a rat’s nest of wiring!

TALENT POD II to the rescue!  It’s the EASY and foolproof way to do remote broadcasts!

With Talent Pod iis, each announcer can control his own mic and headphones.  Need to mix Local and Return audio into headphones? Need a different mix for each announcer? Need to give off-air cues to just the “color guy”? No problem!  Talent Pod II does it all, without  DAs and complicated wiring!

MADI portability at its best!
The compact RME MADIface USB provides MADI I/O over USB 2.0 while supporting the format's full 64 channels for recording and playback, under Mac and Windows. Both inputs can be used for full redundancy operation. Optionally both MADI I/Os can be operated simultaneously for full 128 channel input and output access, mixed and routed by TotalMix. Even without computer the small box delivers extraordinary bi-directional format converter and active repeater functionality.

BURL Audio BDA4M, a mastering grade DAC with stepped attenuators and switchable output transformers. Specifically designed for mixing and mastering, the BDA4M uses the latest BURL NextGen analog for superior fidelity and clarity.

Whenever you need to connect consumer gear to professional equipment, Henry Engineering Matchbox-HD is the way to go! Henry Engineering Matchbox-HD eliminates the hum, buzz, and distortion caused by mismatched levels and impedances. Matchbox-HD is ideal for devices that play and record, such as DAT recorders and computer sound cards. Don't trust your audio to inexpensive units that are powered with "wall-warts"! Superb audio performance is why we've sold over 50,000 units worldwide. 

Burl Audio B80 Mothership is a modular and configurable 80-Channel AD/DA interface.
    
Burl Audio B80 MOTHERSHIP has redefined digital recording. For anyone who has felt that digital recording has been lacking soul, warmth and musicality, the MOTHERSHIP is the answer. Building on the technology of the two-channel B2 BOMBERS, the MOTHERSHIP was forged from BURL AUDIO’S deep dedication to analog class-A circuitry. The result is not only heard, it is felt. The MOTHERSHIP stands out from every other interface on the market not because it is colored, but because it does not sterilize the source.

Pushing the boundaries once again, the B80 MOTHERSHIP AD/DA converter has up to 80 analog channel capability. Using a card based system, and a heavy duty 4U chassis, the B80 MOTHERSHIP employs 10 card slots with 4 and 8 channel AD/DA cards, all with the B2 ADC / DAC quality signal path.

Burl Audio BAES4 daughter card is a 4 channel AES I/O card for the revolutionary B16 and B80 Mothership. The BAES4 card is compatible with all three existing Mothership motherboards, BMB1 Digilink, BMB2 MADI, BMB3 Dante and BMB4 Waves Soundgrid.

Burl Audio BAD8 is an 8-channel analog-to-digital daughter card for the B80 Mothership and B16 Mothership is the result of over 25 years of R&D A/D design experience. Following on the overwhelming success of the B2 BOMBER ADC and the BAD4, the BAD8 employs a next generation analog circuit path and the latest in analog to digital conversion. This is a no compromise design utilizing all class-A, discrete transistor circuitry and the legendary BX1 transformer coupled input. The BAD8 benefits from the new form factor of the BX1 transformer, allowing for more channel density. The BAD8 also boasts the latest analog-to-digital conversion technology giving it great tone with even greater detail and amazing low latency.

Henry Engineering AES Digital DA 2X4 is a distribution system for digital audio signals. It can accept either an AES or S/PDIF digital audio stream, and create four identical AES outputs. The AES DA is 100% bit-accurate and transparent to the source, adding absolutely no delay or latency to the signal. The AES input and all four AES outputs are individually transformer balanced and isolated from ground. The S/PDIF input signal is converted to an AES standard level and source impedance. The AES I/O is via XLR connectors; Pin 1 is connected to the AC “safety” ground. The S/PDIF input is via an RCA connector; the shield is isolated from the AC ground. No user adjustments or calibration is necessary.

BURL Audio B16 MOTHERSHIP 16 CHANNEL CONFIGURABLE AD/DA, a 2U, 2-slot version of the revolutionary B80 Mothership, BURL Audio’s signature product. Simply put, the B80 Mothership has redefined digital recording, and now the legendary sound can be found in a smaller, more portable B16 Mothership.

Burl Audio BMB3 DANTE MOTHERBOARD
The BMB3 features two Ethernet ports for use with Dante enabled DAWs and any Dante enabled device, such as a digital mixing console. With two Dante ports, 64in/64out at 44.1k, 48k, 88.2k, 96k, and 32in/32out at 176.4k, and 192k are supported. With 6 BAD8s and 4 BDA8s a 48×32 IO can be achieved.  With 2 BAD8s and 8 BDA8s a 16×64 IO can be achieved.  With the configurability of the MOTHERSHIP the IO possibilities are limitless.