Mojave Audio MA-201fetVG - Large-Diaphram Condenser Microphone
The MA-201fet is a large diaphragm, phantom-powered, solid-state condenser microphone with a fixed cardioid pattern. With its roots in a lineage of microphone designs by David Royer, the MA-201fet gives warm, full-bodied reproductions of vocals and instruments, with none of the shrillness and high frequency distortion artifacts that are often encountered with modern condenser microphones.
Utilizing a 3-micron gold-sputtered capsule, high-quality Jensen audio transformer, military-grade FET and custom designed low-noise resistors, the MA-20fet performs at a level reminiscent of some of the best loved classic condenser microphones. Each MA-201fet microphone is carefully tested and evaluated, then packaged in its protective case with a professional grade shockmount.
Features
- Hand-selected 3-micron 1" capsule
- Jensen audio transformer
- Military-grade FET
- Custom designed low-noise resistors
- Ultra clean signal path
Recommended applications
- Vocals
- Voice Over and Broadcast
- High SPL sources, such as Kick Drums and Bass Guitar Amps
- Electric Guitar
- Piano
- Drum Overheads, Drum Rooms
- Acoustic Instruments
Specifications
- Transducer Type: Externally polarized pressure gradient capacitor
- Diaphragm: 1-inch diameter, gold sputtered
- Diaphragm Thickness: 3-micron
- Polar Pattern: Cardioid
- Frequency Response: 20 Hz-20kHz, +/- 3dB
- Sensitivity: -39 dB re. 1V/pa
- SPL max.: 125 dB
- Distortion: <1% @120dB SPL, <3% @134dB SPL
- Self Noise: 14dB nominal, not to exceed 16dB (A weighted)
- Impedance: 550 ohms, transformer balanced (Jensen)
- Powering: 48VDC phantom power; current .68mA.
Dimensions and weight
- Case: 10" x 9" x 4.5"
- Weight Case: 4 lbs
- Dimensions Microphone: 7 5/8" X 2" (194mm x 51mm)
- Weight Microphone: 1 lb. (0.45Kg)
Data sheet
- Condition
- New
- Type
- Condenser Microphone
- Application
- Tracking
- Channels
- Mono
- Circuit
- Solid State
- Quantity
- 1