Purple Audio Fader Pack

Speck Electronics introduces Fader 3 from the One Fader Series – Fader 3 is equiped with a mini monitor controller. Except this mini controller has a 100mm stereo slide fader.

Fader 3 Features
• Monitor level control switchable between pre-fader or post-fader. TRS balanced monitor output jacks.
• Seperate headphone level control with headphone jack on front panel.
• 100mm Stereo Slide Fader
• 100% analog signal path
• Small rugged desktop enclosure
• Balanced inputs and outputs with Neutrik XLR connectors
• Ultra-low noise transparent circuitry with +28dBu maximum input and output. Will not add coloration to your signal path
• Jumpers to select 0, 6, or 10 dB of gain
• Internal linear power supply
• 220V external power module included
• Made in San Diego, CA USA

Speck Electronics introduces Fader 2 of the One Fader Series – Connect the Fader 2 (Stereo Fader) to the outputs of your DAW or any audio system that does not have a stereo slider fader. Patch the Fader 2 to the stereo inserts of many popular rack mount "fader-less" line mixers.

Fader 2 Features
• 100mm Stereo Slide Fader
• 100% analog signal path
• Small rugged desktop enclosure
• Balanced inputs and outputs with Neutrik XLR connectors
• Ultra-low noise transparent circuitry with +28dBu maximum input and output. Will not add coloration to your signal path
• Jumpers to select 0, 6, or 10 dB of gain
• Internal linear power supply
• 220V external power module included
• Made in San Diego, CA USA

When you need Faders but don't really need a console 
The via Fader 10M is a brand new way to connect your 500 series racks and audio gear. This product is more than just 10 slide faders. Each fader channel has the necessary input and output electronics to allow the via Fader to interface to any balanced, unbalanced, transformer, or transformer-less line level signal. But most importantly... no additional mixer or audio interface is required.

Purple Audio MF Series Meter Bridge is a 2 RU offers metering to the MFTwenty summing mixer to complete the modular 500 Series console, comes in two varieties:
• Single DB-25 input for use with the MFTwenty 5, with cable.
• Three DB-25 stacked input for use with a standard balanced 8 Pair Cables. For use as remote metering for DAW, Tape Machines, 5.1 or 7.1 Metering, Stereo source metering, etc.
The inputs 1-8, 9-16, 17-22 are multed with 100k input impedance so no additional patch or mult is needed to insert in signal path.

When you need Faders but don't really need a console
The via Fader 16M is a brand new way to connect your 500 series racks and audio gear. This product is more than just 16 slide faders. Each fader channel has the necessary input and output electronics to allow the via Fader to interface to any balanced, unbalanced, transformer, or transformer-less line level signal. But most importantly... no additional mixer or audio interface is required.

With its clean, uncluttered layout, Speck Via Fader 16M can be placed in a convenient desktop location or installed in your 19" rack. This gives you more choices when it comes to the studio layout. Not exclusively for 500 rack systems, the Via Fader 16M can be used for external DAW summing or as a line mixer for synths and samplers. In many cases, the Via Fader 16M can eliminate the need for a mixing console in your studio. The four Via Fader models give you lots of possibilities.

LOOPTROTTER MODULAR CONSOLE is a perfect solution for all producers and engineers who already use 500s modules in their studios. It is fully customizable and compatible with every 500 Series module available on the market. It can be configured to an individual preference. It was designed for ease of use and sized to fit modern recording facility.

The displayed price doesn't include the shipping charges, please consult us.

With the Remote Control, the talkback mic preamp is assignable to stereo masters 1 and 2, mono outputs 1 - 12, and the balanced intercom/slate output. Connects up to 500 feet with a standard CAT5e cable. FOR USE WITH MIX BACK (MB) ONLY.

When you need Faders but don't really need a console
The Via Fader 16 is a brand new way to connect your 500 series racks and audio gear. This product is more than just 16 slide faders. Each fader channel has the necessary input and output electronics to allow the via Fader to interface to any balanced, unbalanced, transformer, or transformer-less line level signal. But most importantly... no additional mixer or audio interface is required.

Like his fellow companion Sum Adjust Classic, Teknosign Sum Adjust Junior is a pure analog summing mixer, but offering digital commands. It shares the same high-quality audio core circuits and great heritage of the past, giving you the best analog sound. However, the Junior is inspired to the great Total Recall consoles of the mid 80’s that were also able to store the global setting of the machines.

The Teknosign Sum Adjust LT has the same core and the same high quality audio features of his brother Sum Adjust Junior. His goal is to satisfy even professionals with smaller budgets without having to sacrifice the quality of their mix. Therefore, to reduce costs, attenuators for the input channels have been eliminated and an attenuator is only provided for the master output. However, the possibility to link the channels in the stereo bus remains. Sum Adjust LT is therefore a summing amp with basic functions like its competitors but it has a big advantage over them. In fact, like its brother counterpart Sum Adjust “Junior” it has the digital control via VST/AAX plug-in and the ability to automate, the memory, the ease of use, the possibility of registration etc. Therefore programming and recalling settings of the bus can also be managed via a dedicated plug-in within your DAW. The Sum Adjust LT is a perfect complement to a larger machine, as the Sum Adjust Junior or other professional summing mixer.

Vertigo Sound VSM-2 a creative fully analog mix & mastering tool
The VSM-2 is a creative fully analog Mix and Mastering tool. The VSM offers MS, Blending and two sophisticated coloration generators in 2U size. The VSM-2 is also available in a “basic version” without harmonic Generators.

This represents a „All In One“-solution for Mastering studios with no more need to invest in mastering consoles, switching devices, monitor controllers, MS En & de-coders etc.

Like all Vertigo Sound products, the VSM-2 is manufactured to the highest industry standards to guarantee the utmost performance and maximum durability.

Finally, with the Teknosign SUM ADJUST CLASSIC summing mixer, you will have a true out of the box mixing power in your Digital Audio Workstation (DAW). You will be able to mix like in the best recording studios with the possibility of adjusting the relation between the various channels in an impeccable way.

The result will simply be the greatest sound you have ever experienced.

Speck Electronics X.Sum - If you need more than simple summing, then you need the X.Sum.
The Speck Electrinics X.Sum is a 32 x 4 line mixer that can be used for external DAW summing or as a line mixer for synths, samplers, and effect returns. Any of the 16 stereo channels can be assigned to either the main stereo Mix output or the stereo Mix-B output.

Speck Electronics XTRAMIX X6 Mixer - 20 stereo Input channels, 4 AUX Sends, 4 stereo AUX Returns, 8 Groups, 1 pair of 2-track Inputs, 2 Monitor Outputs and 1 Main stereo mix BUS, and 130+ connectors on the rear panel!
The X6 console is a 4U rack mounted analog line mixer that offers features and flexibility for use in the most serious recording applications. It has been designed as a "quiet-transparent" platform that allows you to build a mixing system using the gear you already own. The X6 can be used to connect all your analog outboard gear regardless of the pedigree, interface to AD/DA converters, and, of course, virtually any synth or sampler.

It is a fact that not all studios need a console style mixer with slide faders, so the X6 can often replace a studio desk style console and may be a good fit especially if space is at a premium.

Available in 2 versions

• Post Fader Direct Outputs
• Pre Fader Direct Outputs

Looptrotter SATUR-8/24 is the 24 channel summing unit containing 8 channels with analog saturation. The design refers to the sound of old tube mixing consoles and tape recorders.

When you need Faders but don't really need a console
The via Fader is a brand new way to connect your 500 series racks and audio gear. This product is more than just 10 or 16 slide faders. Each fader channel has the necessary input and output electronics to allow the via Fader to interface to any balanced, unbalanced, transformer, or transformer-less line level signal. But most importantly... no additional mixer or audio interface is required.

BURL AUDIO introduces its latest hot bed of creativity, the B32 VANCOUVER NextGen, a 32 channel mix bus. Based on BURL AUDIO’s renowned discrete analog, class-A circuitry, the B32 mix bus employs both the transparency of the B26 ORCA, plus the switchable tonality of the new BURL AUDIO BX5 output transformer.

In addition to the BX5, the B32 VANCOUVER introduces a new concept to the summing amplifier, GAIN BOOST. Adding gain boost with the BX5 will give your mixes that glue that you have been seeking ever since retiring your 2-track analog recorder. With 32 input channels and switchable tonality, the B32 VANCOUVER will allow your mixes to thrive in depth, warmth and clarity. Use the B32 VANCOUVER in conjunction with the B1 MIC PREs, the B80 MOTHERSHIP and the B26 ORCA and you will achieve THE COMPLETE SOLUTION.

Chandler Limited Mini Rack Mixer Expander - 16 Channel Expander for Mini Rack Mixer
The Expander for Chandler Limited Mini Rack Mixer allows you to expand it to 32 channels or more (with more expanders) when combined with the Chandler Limited Mini Mixer.

Together, these units make an attractive, space-saving mixer for studios that are moving from a full-size mixer to a more hybrid setup with a digital audio workstation, but still need enough channels to control your machine's outputs (DAW or tape). Each channel is transformer balanced and driven by Chandler's new Line Amplifier, which is borrowed from other Chandler products but has been redesigned for use in the mixing console and expander. Like the Mini Mixer, the Expander is filled with discrete amps and classic sounds. The unit features 20 discrete amplifiers and 22 custom wound transformers. So it delivers all the punch and tone you need in today's digital environment.

Chandler Limited's Expander mini-mixer is only an additional 16 channels of the mixing section and therefore does not contain a monitor and master control section . Contact Floating Point Audio to build your system!

The Shadow Hills Equinox is like a complete small-format recording console in just 2 rack spaces. It features 2 GAMA mic preamps, 30 channels of analog summing, and a mastering-grade monitor controller.

Henry Engineering SPORTSCASTER ™
SportsCaster is an audio control system for managing the audio portion of a sporting event radio or video broadcast. When used with Henry Engineering’s Sports Pods, SportsCaster creates an integrated system that includes all essential audio functions including audio mixing for air or webcast, headphone audio management and distribution, and off-air intercommunication. SportsCaster is a one-box solution that is comprehensive yet intuitive and easy-to-use. By integrating all functions in one device, SportsCaster eliminates the need for multiple mixers, distribution systems, headphone amplifiers, intercoms, power supplies, and complicated wiring.

LOOPTROTTER MODULAR CONSOLE is a perfect solution for all producers and engineers who already use 500s modules in their studios. It is fully customizable and compatible with every 500 Series module available on the market. It can be configured to an individual preference. It was designed for ease of use and sized to fit modern recording facility.

The displayed price doesn't include the shipping charges, please consult us.

LOOPTROTTER MODULAR CONSOLE is a perfect solution for all producers and engineers who already use 500s modules in their studios. It is fully customizable and compatible with every 500 Series module available on the market. It can be configured to an individual preference. It was designed for ease of use and sized to fit modern recording facility.

The displayed price doesn't include the shipping charges, please consult us.

Teknosign Sum Adjust PRO, currently at “Pre-Release” stage is the best summing amp we can make. Based on the same core of Sum Adjust Junior, it is still a 16 channels summing amplifier with much more interesting features that make it the perfect tool for both High-End studio recording, Live recording and Broadcast. In addition to the Junior, Sum Adjust PRO is equipped with 16 (2 digits 7-segments) displays above each channel that show the exact dB attenuation for each channel. It has 3 Masters (both stereo and mono), 16 XLR inputs, 2 Tascam DB25 inputs, an additional input to cascade more units and an external Master Send / Return connector where to possibly connect other devices (such as a Compressor, for example) with a dedicated push button for instant comparison of processed or not processed signals. A special Lock control has been implemented to “freeze” all knobs and buttons for a safe operation of the gear in live situations. 

LOOPTROTTER MODULAR CONSOLE is a perfect solution for all producers and engineers who already use 500s modules in their studios. It is fully customizable and compatible with every 500 Series module available on the market. It can be configured to an individual preference. It was designed for ease of use and sized to fit modern recording facility.

The displayed price doesn't include the shipping charges, please consult us.

The Tree Audio Stem, one of our latest products, is 8x2 channels of all discrete, Class A Inward Connections amplifiers. It's a stand alone unit that can be used with any console or just as a mixer; no need to use it with a Roots console. Pete Townshend just bought and used a Stem on the latest Who album.

Purple Audio MFTwenty5 is a rack mount discrete summing mixer designed for the 500 series modules and racks. The MFTwenty is a central hub connection other components (fader pack, Vu meters, 500 series racks and modules) to offer an analog modular console. The MFTwenty5 brings new use and value to your 500 racks & modules. Several MFTwenty units can be chained for larger systems. Four fader packs are offered. The optional fader pack and meter can also operate in standalone, without the MFTwenty5.

Looptrotter SATUR-8 EX is the 8 channels unit with a saturation circuit.

SATUR-8ex was designed with a thought of increasing the number of channels with saturation in SATUR-8/24. However it might also be connected to the INSERT socket in your analog mixer or other favourite summing unit.

It can also be used in the recording process between peamplifiers and ADC. The design refers to the sound of old tube mixing consoles and tape recorders.