Mogami female XLR / Bantam male of 1m - 3ft

Purple Audio Fader Packs are a 4 RU Fader units coming standard with two, three foot DB-37 Cables for interconnect to MFTwenty5 Mixer.

Faders are available in four varieties
• FTen – Ten mono faders
• FTen2 – Ten mono faders, one Stereo master fader (displayed price).
• FTwenty – Ten Stereo faders
• FTwenty2 – Eleven Stereo Faders, Ten for inputs, one master fader

Henry Engineering Multi-System Power Pod connects to other Pod products via the cat5 output. It supplies power and Local/Remote (or stereo) audio to all other units in the system. Note that audio may be fed into the Power Pod, OR into any other unit in the system. The cat5 linking will distribute power and audio to the entire system, eliminating the need for separate power supplies, audio DAs, and complicated wiring. The TB OUT jack on the Power Pod provides a convenient way to access the Talkback audio from Sports Pod units; it provides a mix of all the Sports Pods’ Talkback outputs.

Cranborne Audio Half Rack Kit
Rackmount kit for all Cranborne Audio half-rack products.

Complete Rackmount Solution
The Half Rack Kit is perfect for rack mounting any Cranborne Audio half-rack product (such as Camden EC1) into 19” or half-width racks in a variety of different configurations.

Three Possible Configurations
The Half Rack Kit can be used to mount a single unit into a 19” 1U rack space, double-rack two units into a single 19” 1U rack space, or mount a single unit into a half-width, 1U rack space.

Hand crafted Mogami 2552  super flexible, light weight & high performance cable with Male Jack TRS 1/4" -  Male XLR Neutrik Black Series leads. Length: 5m - 16.4ft

8 Pairs high quality analog Mogami 2932 hand crafted cable with D-Sub 25 (Tascam) - 8 female XLR of 3 meters / 10 ft long. Connectors are Neutrik NC3FXX-B metal XLR connectors and metal cover AAA DB25 connector. Each cable is numbered from 1 to 8.

8 Pairs high quality analog Mogami 2932 hand crafted cable with D-Sub 25 (Tascam) - 8 female XLR of 5 meters / 15 ft long. Connectors are Neutrik NC3FXX-B metal XLR connectors and metal cover AAA DB25 connector. Each cable is numbered from 1 to 8.

Mogami cable with Neutrik female XLR -  Bantam stereo TRS 4.4mm leads of 5 meters / 16.4 ft long, hand crafted Mogami 2552 super flexible, light weight and high performance cable with high quality connectors.

The Punchlight Relay SwitchBox USB is a small USB powered unit with two built-in switching relays. The unit can control any signalling systems already installed in the studio. You can control any other device, e.g. speakers, a microphone or even your own light system via just one small box. The Relay Switch Box USB can work without a power supply, as it is connected and powered via just a 5V USB port.

Flexible use
The Relay SwitchBox USB is designed for anybody working in project, dubbing, or post production studios who needs visual confirmation of when a recording begins or ends. This simple, precise and easy to use device is perfect for musicians and sound engineers as well as film, tv and video editors. It is easy to install in any studio environment.

External light
It is possible to connect an additional external light, such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp. A 12V power supply is needed in this case. The 12V PSU is not supplied in the package.

Compatible software
The unit is compatible with most audio applications such as Pro Tools, Cubase, Logic Pro, Digital Performer, Samplitude, Reaper, Sonar, Vegas Pro. automatically sends information about Recording start/stop and record "ready" to the Relay Switch Box USB.

Software Utility
All functions are set up via the PunchLight Software Utility

Male XLR - Female XLR Mogami cable of 1 meter - 3 ft long, hand crafted Mogami 2552 super flexible, light weight and high performance  cable with high quality Neutrik AAA Series metal connectors.  

High quality 8 pair Mogami Neglex 2932 Analog Cable
• Handmade
• 8 Neutrik AAA male XLR connectors, color: black
• 8 Neutrik AAA female XLR connectors, color: black
• Length: 10 meters / 32.8 ft
• Splice standard length : 30 cm / 1 ft (can be modified on request) with individual sleeving
• Numbering: 1 to 8 with color coded rings

Hand crafted Mogami 2552  super flexible, light weight & high performance cable with Male Jack TRS 1/4" -  Male XLR Neutrik Black Series leads. Length: 10m - 32.8ft

Original spider type metal shockmount for Pearlman microphones, equipped with a 25 mm diameter screw base.

The microphone is screwed directly on the suspension allowing the elastics to offer a better resistance to vibrations.

Attention, this suspension is not suitable for all microphones. Please refer to the compatible models.

8 Pairs high quality analog Mogami 2932 hand crafted cable with D-Sub 25 (Tascam) - 8 male XLR of 5 meters / 15 ft long. Connectors are Swtchcraft AAA grade metal XLR and metal cover AAA DB25 connector. Each cable is numbered from 1 to 8.

Signex OCB00 Optical patch cord, A premium quality Toslink cable for pro-installs - comes in 0.6m, 1.0m, 2.0m, 5.0m and 10m lengths.

Flight Case for one Barefoot MM27 and MM26 speakers
This transport case is made of shock and water resistant plywood with 30 x 30 x 1.5mm aluminum fields and angles. 2 butterfly type locks and equipped with 2 recessed flip handles. It weighs only 12kg. Castors in option. 

8 Pairs high quality analog Mogami 2932 hand crafted cable with D-Sub 25 (Tascam) - 8 female XLR of 10 meters / 30 ft long. Connectors are Neutrik NC3FXX-B metal XLR connectors and metal cover AAA DB25 connector. Each cable is numbered from 1 to 8.

The Vanguard VSSM is a heavy-duty, professional-grade shockmount designed to give your mics long-lasting, high-grade support.

Punchlight Relay Extender is a new accessory, which takes the PunchLight product line into a new direction. You can control any other device, eg speakers, a microphone or even your own light system via one small additional box.

It is very easy to connect it to an existing PunchLight MIDI or PunchLight GPI and automatically turn appropriate gear on or off.

CB Electronics TC-5net LTC/Midi/USB/ArcNet Timecode Display/Converter with RTC
The TC-5net-Midi is a professional MTC/LTC interface with LED display, Video Sync, Word Clock input and USB port. The TC-5net Midi is designed to be equally at home in Audio, Video and Lighting Environments, applications include Digital Audio Workstations, Non Linear Video Editors, Mixing Consoles, Show Control and Lighting Control.

As a test tool the TC-5net-Midi can check the frequency of Timecode, MTC, Video and Word Clock. The TC-5 can also compare LTC with MTC.

Manuals and software available in the TC-5net and TC-7 DATA PACK Available on the CB Electronics' Downloads page

8 Pairs high quality analog Mogami 2932 hand crafted cable with D-Sub 25 (Tascam) - 8 female XLR of 1 meter / 3 ft long. Connectors are Neutrik NC3FXX-B metal XLR connectors and metal cover AAA DB25 connector. Each cable is numbered from 1 to 8.

Male XLR - Female XLR Mogami cable of 5 meters - 15 ft long, hand crafted Mogami 2552 super flexible, light weight and high performance  cable with high quality Swtchcraft AAA Series metal connectors.  

Punchlight Studio Display USB is for when you need to see time code precisely and independently from your monitor.

The Studio Display USB greatly expands the features of the existing Time code Display. In addition to time code, the display can show bars&beats, time, or samples. It is extremely slim and compact, 16 mm thin.

Compatible with Pro Tools, Cubase, Nuendo, Logic Pro and most other audio/MIDI applications.

Undertone Audio Vari-Cap Instrument Cable
Eric Valentine and Larry Jasper devised a revolutionary solution which allows guitarists to vary the amount of capacitance imparted by the cable, resulting in a MASSIVE influence on the overall tone. It simply allows you to recreate a multitude of sounds from different instrument cables with a single cable.

The VARI-CAP tm essentially liberates a guitarist from just one tone per cable -- aguitarist can now scan through 16 different tones with just one cable. Thought you’d heard every tone your guitar could play? The VARI-CAP offers an adjustment range from 150 pF to 1650 pF and breathes new life between guitars and amps and opens up a whole new spectrum of tonal possibilities.

For passive instruments ONLY. Must be plugged into the instrument.

Purple Audio MF Series Meter Bridge is a 2 RU offers metering to the MFTwenty summing mixer to complete the modular 500 Series console, comes in two varieties:
• Single DB-25 input for use with the MFTwenty 5, with cable.
• Three DB-25 stacked input for use with a standard balanced 8 Pair Cables. For use as remote metering for DAW, Tape Machines, 5.1 or 7.1 Metering, Stereo source metering, etc.
The inputs 1-8, 9-16, 17-22 are multed with 100k input impedance so no additional patch or mult is needed to insert in signal path.

Universal 500 Series blank panel for all standard 500 racks & Lunboxes.

Color: black with no inscription. Also available in white.

The Recording PlexSign Large is a brand-new uniquely designed light unit set in high-grade plexiglass. The illuminated letters are engraved using a high precision milling technique. Aesthetically stunning, it has the same functionality as the Recording Display.

It can be connected to the PunchLight DLi, PunchLight GPI or the PunchLight MIDI either of which act as a trigger.

It is designed for studios where aesthetics are important. In the standard version the product displays "RECORDING" in red and also has a light for "Record Ready" (yellow). It attaches to any door or wall via two short wires with hooks. It comes in a very smart brushed aluminum casing.

8 Pairs high quality analog Mogami 2932 hand crafted cable with D-Sub 25 (Tascam) - 8 male XLR of 5 meters / 15 ft long. Connectors are Swtchcraft AAA grade metal XLR and metal cover AAA DB25 connector. Each cable is numbered from 1 to 8.

Royer Labs PS-101 Pop Filter
Finally, a pop filter that doesn't filter your sound along with the pops. Look through a Royer PS-101 pop filter and you will see the mic clearly. The secret is the special louvered metal that deflects wind downwards while letting sound go directly through. The PS-101 will last for many years (try that with your nylon!), it can be cleaned with soap and water, and it looks good too!

Mogami cable with Neutrik female XLR -  Bantam stereo TRS 4.4mm leads of 3 meter - 9.8 ft long, hand crafted Mogami 2552 super flexible, light weight and high performance cable with high quality connectors.

Crookwood Stereo VU Meter Large dimensions with attenuator- A real VU meter with attenuator and LED backlights
A large, real VU meter with precision Sifam units and LED backlights. Designed for modern workflows so you can concentrate on the music and not on metering:
• Large, proper VU meter with Sifam VUs for accurate metering
• LED backlighting so it’s easy to read in any studio
• Built in stepped attenuator, means they work perfectly with any studio level
• Easy to connect, calibrate and adjust
• Fit into any 2U space, or place onto a surface with the optional oak case
• External Power Adaptor Included

Locomotive Audio ZCAR Passive DI & Amp-Up in One Box
Capture your performance now, audition on any pedal or amp later.
The all new Locomotive ZCAR is simple. Connect any instrument to your favorite mic preamp and record. Then, send the recorded signal to your pedal chain or amp of choice - all from one box!

With ZCAR's mu-metal shielded transformer, the 1/4" jacks and XLR jacks are isolated from one another. This provides proper input and output impedances on each side, so that you can focus more on performance and less on technical requirements. And since the ZCAR is passive, no power source is necessary. Just plug and play, anywhere!

Similar to the PunchLight GPI and PunchLight MIDI, the PunchLight DLi automatically switches on an external light unit such as the RECORDING Display, RECORDING PlexSign, RECORDING Ring or RECORDING Lamp.

It has front panel LED status indication - recording or record ready. Two light units can be controlled simultaneously; the third output is a dedicated connection for the Studio Display XT2 or SD2 (second generation).

The PunchLight DLi is connected via USB to a computer (PC or Mac) in your studio and the USB cable and 12V power supply is included.

Cranborne Audio Vintage Wallpaper are sold in retail units that include 2x blanking plates to enable you to get the full effect of the Victorian Wallpaper pattern across two empty slots on your Cranborne Audio 500R8 or 500ADAT. They are of course, also compatible with any third party standard 500 Series Rack or Lunchbox.

Punchlight RECORDING Display is a light unit which has to be connected to the PunchLight GPI, PunchLight DLi or the PunchLight MIDI either of which act as a trigger. It is designed for studios where aesthetics are important. In the standard version the product displays "RECORDING" in red and also has lights for "Record Ready". It comes in a very smart brushed aluminium casing. Custom labels, text or graphic can also be specified upon request.

Hand crafted Mogami 2552  super flexible, light weight & high performance cable with male Jack TRS 1/4" -  female XLR Neutrik Black Series leads. Length: 10m - 32.8ft

Signex Rear Connector Kit RCK25M1 Sub-D metal connector Tascam DA88 type (analog) with metal hoods, thumb screws and isolators for Multi-core cables and Patch Bays.

You may also require the Lacing Bar Kit (LBK01) to support the extra weight of rear wire looms.

The Vanguard VLSM is a heavy-duty, professional-grade and universal shockmount designed to give your mics long-lasting, high-grade support.

Chandler Limited PSU-1 - External Power Supply
All Chandler Limited units require an external power supply. This avoids noise and hum interference. The PSU-1 can supply up to two units (except the Mini Rack Mixer).

Hear technologies Tote Bag is a soft-side nylon carrying case great for carrying 8 Hear Back Mixers, 1 Hub and acessories, or whatever you can fit in it! Features adjustable dividers with velcro.

• Size: 22" L x 11" W 7.5" D
• Weight: 4.69 lb

UTA GB Tracker & Satellite are an integrated system that allows you to capture and re-amplify guitar and bass signals with DAW recording setup.

The circuity is designed to maintain absolute sonic transparency as well as unity gain at a variety of detented recording level settings.

The system, with addition of Satellite units, is expandable so you can send a DI signal to as many amps as you want. You can add Satellite units to feed additional amps while maintaining ground isolation between all elements of the system.

The GB Tracker/Satellite system creates a seamless and flexible workflow while recording guitar and bass so you can focus on performances when in the heat of the moment and focus on sounds at any point down the road.

UTA Satellite is the reamping half of the Tracker in its own case, allowing engineers to send the line level signal to an amp in another room, or to daisy chain to multiple amps. The Satellite can also work as a standalone reamping box without the GB Tracker.

Hand crafted Mogami 2552  super flexible, light weight & high performance cable with male Jack TRS 1/4" -  female XLR Neutrik Black Series leads. Length: 3m - 9.8ft

Punchlight V-CON TX is a wireless transmitter, connected to one of the trigger units via a 12V out. The unit is included in the Punchlight Wireless Upgrade Kit.

PunchLight WLi is a unique product which uses wireless technology to connect your computer to studio warning lights.

It allows the of use of previously installed PunchLight lights and the expansion of the light system without cables - it can also connect to one external light via 12v output. The WLi connects to your computer via USB and transmits to each light currently via the W-CON RX receiver/s. Theoretically, you can control an unlimited number of wireless lights with one PunchLight WLi unit.

Royer The dBooster - In-Line Signal Booster
The dBooster has two gain settings, 12 dB and 20 dB, allowing you to dial in just the right amount of in-line gain for your different singers and instruments. The 20 dB setting gives loads of clean boost for recording soft instruments and singers, but when your singer is wailing or you use the dBooster on high volume instruments like electric guitar, switch it down to 12 dB to keep from overloading your preamp or digital interface.

The dBooster’s Class A input stage delivers crystal clean gain with virtually no noise or self-distortion.

Coil Auio PS6 Rack Tray & Power Supply
House and power up to six CA-70 a CA-286 modules. The PS6 Rack Tray and PSU is comprised of a 7U Rack Tray and a separate 2U power supply. The 'soft-start'/standby feature allows you to switch the Filament and B+ voltages on and off separately.

PS6 Power Supply and Rack Tray sold separately.