UTA GB Tracker & Satellite are an integrated system that allows you to capture and re-amplify guitar and bass signals with DAW recording setup.
The circuity is designed to maintain absolute sonic transparency as well as unity gain at a variety of detented recording level settings.
The system, with addition of Satellite units, is expandable so you can send a DI signal to as many amps as you want. You can add Satellite units to feed additional amps while maintaining ground isolation between all elements of the system.
The GB Tracker/Satellite system creates a seamless and flexible workflow while recording guitar and bass so you can focus on performances when in the heat of the moment and focus on sounds at any point down the road.
UTA Satellite is the reamping half of the Tracker in its own case, allowing engineers to send the line level signal to an amp in another room, or to daisy chain to multiple amps. The Satellite can also work as a standalone reamping box without the GB Tracker.
Specifications
Input impedance
- Instrument input: 1Mohm, 4.7Mohm, 5.7Mohm (internally selectable)
- From DAW: 15Kohm
Output impedance
- To Amp: 2Kohm
- To DAW: 47ohm
Frequency response
- “INPUT” to “DAW OUTPUT“: 20Hz - 50KHz 0dB to -1dB
- “FROM DAW” to “TO AMP”: 20Hz - 40KHz 0dB to -1dB
Max level before clip with 600Ω load to DAW: +24dBm
Distortion: Input to DAW Output: <0.02% THD 20Hz-20kHz @+20dBu
Dimensions: 1.93” x 4” x 3.55” (HxDxW)
Weight: 0.86 Lbs
Please note that universal power supplies manufactured in the USA may be delivered in 110V. Make sure that the fuse is set to 220V (for European countries only) and not 110V before plugging in the unit, otherwise it may be damaged. It may be necessary to use an IEC13 cord suitable for your country, not supplied
Data sheet
- Condition
- New
- Type
- Instrument Cable Extension
- Application
- Recording / Live
- Channels
- Mono
- Circuit
- Solid State
- Output transformer(s)
- Sowter
- Quantity
- 1