The innovative Undertone Audio GB Tracker is a combination instrument preamp and re-amplifying device, making it an all-in-one solution for both capturing a line level DI signal and re-amping it.
This unique design features detent'ed gain-matching input and output level controls that allow you to always maintain a precise unity gain through the DI to the re-amplification path. This, combined with our painstaking effort to match the commonly used impedances on popular guitars, basses, and amps, Makes the GB Tracker sonically transparent. your guitar or bass going through the GB Tracker will sound exactly the same as plugging directly into your amp.
Specifications
- Input voltage: 24V AC (200mA)
Input impedance
- Instrument input: 1Mohm, 4.7Mohm, 5.7Mohm (internally selectable)
- From DAW: 15Kohm
Output impedance
- To Amp: 2Kohm
- To DAW: 47ohm
Frequency response
- “INPUT” to “DAW OUTPUT“: 20Hz - 50KHz 0dB to -1dB
- “FROM DAW” to “TO AMP”: 20Hz - 40KHz 0dB to -1dB
Max level before clip with 600Ω load to DAW: +24dBm
Distortion: Input to DAW Output: <0.02% THD 20Hz-20kHz @+20dBu
Dimensions: 1.93” x 6.18” x 7.2” (HxDxW)
Weight: 2.4 Lbs/ 0.900 kg
Please note that universal power supplies manufactured in the USA may be delivered in 110V. Make sure that the fuse is set to 220V (for European countries only) and not 110V before plugging in the unit, otherwise it may be damaged. It may be necessary to use an IEC13 cord suitable for your country, not supplied.
Read moreShow less
English GB
Français