Traverse Analogue Mass DI

Features

• Hand-assembled, hand-soldered, fully discrete
• JFET/BJT Class-A biased circuitry
• Custom Lundahl transformer (double mu-metal wrapped)
• 18ga steel chassis is solid, industrial and tough
• 10 MΩ input impedance (220 KΩ with PAD)
• +48VDC phantom-powered
• Neutrik ¼” jacks and XLR receptacle
• No ground lift switch (internal ground loop suppression)
• LED and PAD switch are recessed to minimize drop damage
• Can be used between an amplifier and speaker to directly capture amp tone
• Huge headroom - can take unbalanced line-level signals (up to 245 volts P-P with pad)
• 2-Year Limited Warranty

Specifications

• Input Impedance: 10 MΩ (without pad) / 220 KΩ (with pad)
• Output Impedance: Less than 40 Ω
• Frequency Response: 10Hz – 60kHz (+/- 1dB)
• Noise: Better than -105 dBu, unweighted (20Hz – 30kHz)
• THD+N:

        - 20Hz @ 0dBu = < 0.04%
        - 1kHz @ 0dBu = < 0.04%
        - 1kHz @ +19dBu = < 0.08%

• Maximum Input Level: +21dBu (without pad) / +41dBu (with pad)
• Maximum Output Level: +1dBu @ max. input level
• Power Requirement: +48VDC (phantom power) @ 3.9mA
• Dimensions: 5.3” L x 3.1” W x 2.3” H - 135mm L x 80mm W x 58mm H
• Weight: 0.518 Kg