Andinate AVIO Dante Analog Output 0x2

Henry Engineering AES Digital DA 2X4 is a distribution system for digital audio signals. It can accept either an AES or S/PDIF digital audio stream, and create four identical AES outputs. The AES DA is 100% bit-accurate and transparent to the source, adding absolutely no delay or latency to the signal. The AES input and all four AES outputs are individually transformer balanced and isolated from ground. The S/PDIF input signal is converted to an AES standard level and source impedance. The AES I/O is via XLR connectors; Pin 1 is connected to the AC “safety” ground. The S/PDIF input is via an RCA connector; the shield is isolated from the AC ground. No user adjustments or calibration is necessary.

Andinate AVIO Dante USB A Output
Connect your USB - enabled computers and mobile devices directly to a Dante audio network, no drivers or additional software required

Network Everything
Dante AVIO USB A Adapter support 2 x 2 channels of bidirectional audio, allowing PCs and mobile devices to playout and record audio with any Dante-enabled devices over a standard IP network. Use audio applications like media players, conferencing software, presentations and recorders with net-work-connected speakers, microphones, mixers and DSPs. Cost effective, compact and built for the road, the Dante AVIO family of adapters bring the modern network connectivity that every audio pro needs in their toolbox Dante AVIO analog  adapters are available as input or output versions in 1- or 2-channel configurations.
• Plug and play operation
• Built for the road
• 24 bit audio support
• Dante Audio over IP and AES67 RTP transport formats
• Power over Ethernet (PoE) support
• Configurable gain/attenuation
• Dante Domain Manager ready

Signex Pro Audio OCX02 Co-Axial to Optical Line Driver.

Needs the ACA02 external power supply.

Signex Pro Audio OCX03 Co-Axial to Optical Line Driver. (TL-TL)

Needs the ACA02 external power supply.

Andinate Dante AVIO Bluetooth 2x1
Wirelessly connect your computers and mobile devices to a Dante audio network via Bluetooth

Network Everything
The Dante AVIO Bluetooth Adapter connects to your Dante network and supports 2 x 1 channels of wireless audio, allowing PCs and mobile devices to playout and receive audio with any of your Dante-enabled devices using only a Bluetooth® connection. Connect audio applications like media players and conferencing software to speakers, microphones, mixers and DSPs on your network. Cost effective, compact and built for the road, the Dante AVIO family of adapters bring the modern network connectivity that every audio pro needs in their toolbox
• Plug and play operation
• Built for the road
• 2 x 1 audio channels
• 24 bit audio support
• Dante Audio over IP and AES67 RTP transport formats
• Power over Ethernet (PoE) support
• Dante Domain Manager ready

Henry Engineering TwinMatch is a dual-stereo (4-channel) level and impedance converter that interfaces two “consumer” stereo outputs with professional balanced equipment.

TwinMatch is ideal for use with a pair of stereo CD players or other "play only" sources. The unit accepts four channels (2 stereo pairs) of -10 dBv unbalanced audio and converts to professional "600 ohm" balanced lines. The gain is adjustable to accommodate either +4 or +8 dBm systems.

Audinate AVIO Dante AES3 Converter x2 I/O
Network all your AES3 / EBU equipped audio gear easily and cost-effectively with Dante AVIO

The Dante AVIO AES3/EBU Adapter supports 2 x 2 channels, with high-quality XLR input and output connectors and built-in asynchronous sample rate conversion. Use the AES3 Dante AVIO Adapters to add Dante networking to amplifiers, speaker processors, mixing consoles, video systems and more. Cost effective, compact and built for the road, the Dante AVIO family of adapters bring the modern network connectivity that every audio pro needs in their toolbox.

• Plug and play operation
• Built for the road
• 16, 24, and 32 bit audio support
• Synchronous sample rate conversion
• Excellent dynamic range, SNR and THD performance
• Dante Audio over and AES6 RTP transport formats
• Power over Ethernet (PoE) support
• Dante Domain Manager ready

Signex Pro Audio Co-Axial to Optical Line Driver.

Needs the ACA02 external power supply.

Andinate AVIO Dante Analog Output 0x2
Network all your analog audio gear easily and cost - effectively with Dante AVIO

Network Everything
Dante AVIO Analog Adapters let you use your favorite analog audio gear with any Dante-connected system, delivering the interoperability, performance and scalability that only  networking can bring. Cost effective, compact and built for the road, Dante AVIO adapters bring the modern network connectivity that every audio pro needs in their toolbox.

Dante AVIO analog adapters are available as input or output versions in 1- or 2-channel configurations.
• Plug and play operation
• Built for the road
• Sample rates up to 96 kHz
• 16, 24, and 32 bit audio support
• Excellent dynamic range, SNR and THD performance
• Configurable gain/attenuation
• Power over Ethernet (PoE) support
• Dante Domain Manager ready

Andinate AVIO Dante USB C Output
Connect your USB - enabled computers and mobile devices directly to a Dante audio network, no drivers or additional software required

Network Everything
Dante AVIO USB-C Adapter support 2 x 2 channels of bidirectional audio, allowing PCs and mobile devices to playout and record audio with any Dante-enabled devices over a standard IP network. Use audio applications like media players, conferencing software, presentations and recorders with net-work-connected speakers, microphones, mixers and DSPs. Cost effective, compact and built for the road, the Dante AVIO family of adapters bring the modern network connectivity that every audio pro needs in their toolbox Dante AVIO analog  adapters are available as input or output versions in 1- or 2-channel configurations.
• Plug and play operation
• Built for the road
• 24 bit audio support
• Dante Audio over IP and AES67 RTP transport formats
• Power over Ethernet (PoE) support
• USB-C to USB-C cable included
• Configurable gain/attenuation
• Dante Domain Manager ready

Henry Engineering LogiConverter is a general purpose control interface that eliminates the incompatibility between various audio and video equipment remote control circuits.

LogiConverter has 4 opto-isolated inputs that control 4 isolated relay outputs. The unit can be programmed to provide either latched or momentary outputs from either continuous or momentary inputs with up to 24 combinations possible. A single input can provide single or dual "flip-flop" outputs; two inputs can latch and reset an output.

It happens often: someone comes into your studio and wants to connect their CD player, iPod, portable digital recorder, flash drive, cassette deck, or whatever to your studio. Either they want to play something to your studio, or they want to record audio from your studio.

It might be professional gear or a consumer device. It might be analog or digital. Is it AES/EBU or S/PDIF? Does it need XLRs, or a ¼” phone plug, or a 3.5mm mini-plug, or a phono plug? Maybe a video crew wants you to give them an audio feed for their TV camera. You never know who wants to plug what into your studio, but it’s a hassle to figure it out at the last minute. Until now!

Henry Engineering MultiPort solves this problem by providing you with a central place to connect just about anything to your audio system. Easily plug in pro gear, consumer gear, analog or digital, without needing converter boxes, adaptors, patch cords, or last-minute wiring strung from the back of your rack.

Whenever you need to connect consumer gear to professional equipment, Henry Engineering Matchbox-HD is the way to go! Henry Engineering Matchbox-HD eliminates the hum, buzz, and distortion caused by mismatched levels and impedances. Matchbox-HD is ideal for devices that play and record, such as DAT recorders and computer sound cards. Don't trust your audio to inexpensive units that are powered with "wall-warts"! Superb audio performance is why we've sold over 50,000 units worldwide.