Click for more products.
No products were found.
×

Cortado MkIII Attachment Accessory Kit

Cortado MkIII Attachment Accessory Kit - A variety of clamps and adhesives to attach the Cortado MkIII contact microphone to virtually any surface. Includes:
• 4″ spring clamp
• Custom hold-down strap with screws
• 6 pats of sensor putty
• 2 discs double-stick tape

Read moreShow less
€38.60 (incl. VAT)

€32.17 tax excl.

Availability: 15 days
Avaialble in 10 days
Condition
New
Reference:
CORTMK3KIT
Love0
Add to compare0
Add to wishlist
Description

The kit contains a variety of clamps and adhesives to attach the Cortado MkIII contact microphone to virtually any surface.

The kit content
• 4″ spring clamp – attach mic temporarily and securely to the edge of any object up to 1″ (2.5 cm) thick
• Custom metal strap with screws – permanently attach the mic to any surface that will take a screw; especially well-suited to the underside of staging, dance floors, and basketball courts.
• 6 pats of sensor putty – temporarily attach the sensor to any surface at all. Recommended for musical instruments with fine finishes.
• 2 discs double-stick tape – permanently and securely attach the sensor to any smooth surface. CAUTION: This tape will likely damage fine oil and lacquer finishes.2 discs double-stick tape

Read moreShow less
Product Details
CORTMK3KIT

Data sheet

Condition
New
Type
Contact Microphone
in-line preamp
Application
Tracking
Channels
Mono
Circuit
Solid State
Direct I/O
Yes
Reviews
No comments
5 other products in the same category:
Zeppelin Design Labs
Zeppelin Design Labs
€341.89 (incl. VAT)
Last items in stock

Zeppelin Design Labs The Percolator 2 Watt Tube Amp (valve amp) DIY KIT is perfect for electric guitar, cigar box guitar and harmonica. Ideal for bedroom, apartment, practice, studio, or stage. Unlike any other production guitar amp, it has an all-tube signal path that uses only one (NOS) Compactron tube (valve). The single volume knob allows for warm, rich, clear tones at lower levels and aggressive overdriven tones at higher levels — all at a moderate volume. The kit includes everything you need to build this low watt amp as shown. You can finish the cabinet any way you like, or mount the head into your own cab. See the “Documentation” tab below to download our colorful, detailed manuals and videos. They provide clear, step-by-step instruction on how to build your very own Percolator tube amp!

Zeppelin Design Labs
Zeppelin Design Labs
€54.04 (incl. VAT)
Avaialble in 10 days

Zeppelin Design Labs Cortado MkII Balanced Buffered Contact Mic DIY Kit
The Cortado MkII Balanced Buffered Contact Mic kit contains a phantom-powered circuit that balances the signal from a piezo transducer and matches its high output impedance to the low input impedance typical of consoles and recorders. Please note the MkII is only offered as a DIY kit.

MkII Features
• Extended low-end response for full, rich sound
• Adjustable bias for optimal performance
• Crazy-low noise floor
• The kit includes all the parts needed to build a Contact Mic or an Instrument Pickup
• Cortado MkII can be adapted into a fabulous Tin Can Mic, as detailed in our Instructable
• The Cortado MkII requires Phantom Power
• Bulk mic cable is available to extend cable lengths

Looking for the NEW Cortado MkIII Pro Audio Contact Mic? Click here.

Guitar Pedals
Zeppelin Design Labs
€121.31 (incl. VAT)
Availability: In stock

Zeppelin Design Labs Quaverato Harmonic Tremolo Pedal DIY Kit
Quaverato Harmonic Tremolo Pedal  DIY Kit combines many features to make a great sounding, versatile, and practical stompbox. Full MIDI implementation available as an option.
• Digitally controlled, all analog signal path combining maximum flexibility with great tone.
• Both Traditional (In-Phase) and Harmonic (Out-Of-Phase) Tremolo modes
• Up to 15dB of gain
• Modulates the high and low frequencies independently for dynamic swirling effects
• Extra internal controls allow for custom crossover frequency selection and individual HIGH and LOW signal path volume adjustment, for full tonal control
• Bypass footswitch can be used as either a toggle or momentary switch
Plus all the usual:
• LFO wave shape, rate, depth and spacing (aka wave form shift or duty cycle)
• Tap Tempo footswitch and multiplier selection
• Relay controlled, true-bypass switching with click suppression for quiet switching
• MIDI implementation gives remote control over every feature

Microphones
Zeppelin Design Labs
€208.44 (incl. VAT)
Avaialble immediately

The Cortado MkIII contact microphone is the latest incarnation of Zeppelin Design Labs' popular balanced and buffered contact microphone.
• All-new sensor design is nearly indestructible
• Phantom-powered onboard preamp circuit is housed in rugged steel chassis
• 6′ (1.8m) shielded cable from sensor to chassis
• 23 Hz – 40 kHz bandwidth
• Switchable onboard high pass filter (called “Bass Boost”)
• -10 dB PAD for recording extra-loud sources
• Requires 24-48 VDC phantom power from a standard XLR mic cable
• Optional rubber feet for the chassis included
• Mounting putty included
• The optional Attachment Accessory Kit includes a variety of clamps, tape and extra putty for attachment to any surface

Zeppelin Design Labs
Zeppelin Design Labs
€186.38 (incl. VAT)
Last items in stock

Cabinet for Percolator Zeppelin Design Labs Speaker Cabinet 1×8  is available as a DIY KIT

  • 25-watt, 8 Ohm Jensen C8R speaker
  • Solid poplar cabinet
  • 1/4″ input jack
  • Comes with 6″ speaker cable to connect the Percolator (or other amp)
  • For KIT, download the detailed step-by-step assembly manual (see “Documentation” tab below)
  • Online demo & assembly videos
  • Kit contains everything you need to complete the cab as shown.
  • Beginners project, ages 13+; may need some supervision


This cabinet is designed to match the Percolator 2 Watt Tube Amp, but sounds great with any small amp.

You may also like
Zeppelin Design Labs
Zeppelin Design Labs
€186.38 (incl. VAT)
Last items in stock

Cabinet for Percolator Zeppelin Design Labs Speaker Cabinet 1×8  is available as a DIY KIT

  • 25-watt, 8 Ohm Jensen C8R speaker
  • Solid poplar cabinet
  • 1/4″ input jack
  • Comes with 6″ speaker cable to connect the Percolator (or other amp)
  • For KIT, download the detailed step-by-step assembly manual (see “Documentation” tab below)
  • Online demo & assembly videos
  • Kit contains everything you need to complete the cab as shown.
  • Beginners project, ages 13+; may need some supervision


This cabinet is designed to match the Percolator 2 Watt Tube Amp, but sounds great with any small amp.

Zeppelin Design Labs
Zeppelin Design Labs
€341.89 (incl. VAT)
Last items in stock

Zeppelin Design Labs The Percolator 2 Watt Tube Amp (valve amp) DIY KIT is perfect for electric guitar, cigar box guitar and harmonica. Ideal for bedroom, apartment, practice, studio, or stage. Unlike any other production guitar amp, it has an all-tube signal path that uses only one (NOS) Compactron tube (valve). The single volume knob allows for warm, rich, clear tones at lower levels and aggressive overdriven tones at higher levels — all at a moderate volume. The kit includes everything you need to build this low watt amp as shown. You can finish the cabinet any way you like, or mount the head into your own cab. See the “Documentation” tab below to download our colorful, detailed manuals and videos. They provide clear, step-by-step instruction on how to build your very own Percolator tube amp!

Zeppelin Design Labs
Zeppelin Design Labs
€54.04 (incl. VAT)
Avaialble in 10 days

Zeppelin Design Labs Cortado MkII Balanced Buffered Contact Mic DIY Kit
The Cortado MkII Balanced Buffered Contact Mic kit contains a phantom-powered circuit that balances the signal from a piezo transducer and matches its high output impedance to the low input impedance typical of consoles and recorders. Please note the MkII is only offered as a DIY kit.

MkII Features
• Extended low-end response for full, rich sound
• Adjustable bias for optimal performance
• Crazy-low noise floor
• The kit includes all the parts needed to build a Contact Mic or an Instrument Pickup
• Cortado MkII can be adapted into a fabulous Tin Can Mic, as detailed in our Instructable
• The Cortado MkII requires Phantom Power
• Bulk mic cable is available to extend cable lengths

Looking for the NEW Cortado MkIII Pro Audio Contact Mic? Click here.

Microphones
Zeppelin Design Labs
€208.44 (incl. VAT)
Avaialble immediately

The Cortado MkIII contact microphone is the latest incarnation of Zeppelin Design Labs' popular balanced and buffered contact microphone.
• All-new sensor design is nearly indestructible
• Phantom-powered onboard preamp circuit is housed in rugged steel chassis
• 6′ (1.8m) shielded cable from sensor to chassis
• 23 Hz – 40 kHz bandwidth
• Switchable onboard high pass filter (called “Bass Boost”)
• -10 dB PAD for recording extra-loud sources
• Requires 24-48 VDC phantom power from a standard XLR mic cable
• Optional rubber feet for the chassis included
• Mounting putty included
• The optional Attachment Accessory Kit includes a variety of clamps, tape and extra putty for attachment to any surface

Menu

Settings

Share

Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in