Hear Technologies Mic Stand Adapter

The Hear Technologies Mixer Tilt Adapter ( MTA ) is for all Hear Back Mixers adding a ball joint with 5/8”-27 male threading to any standard mic stand to get the perfect angle with 360° rotation and 180° tilt. Tilting Adapter for all Hear Back Mixers.

To mount and tilt the mixer, you will also need the Stand Adapter.

The PRO Mixer Distro allows a single Cat6 cable to be run from the Hear Back PRO Hub to the stage/studio where the PRO Mixer Distro can be placed where needed.

It also allows the same 8-port Network Card that goes in the Hear Back PRO Hub to be used stand-alone. A durable anodized aluminum housing protects the Hear Back PRO Network Card and allows it to stand up to years of abuse in the studio or on the road. The Distro also uses the same 4-pin XLR power connector used by the Hear Back PRO Hub. This allows the same standard Hear Back PRO power supply to be used with the Distro. The user can connect another Distro with a ninth RJ45 Ethernet connector (BUS IN) or to the HBUS output or Mixer network card on a Hear Back PRO Hub.

Hear Technologies Pack of 5 Blank Overlays for Hear Back PRO Mixer. Allows you to save your session and name each channel.

Hear Back PRO Digital Overlay from Hear Technologies
The PRO Digital Overlay is an ultra-thin faceplate for electronic labeling of a Hear Back PRO Mixer. This attachable upgrade modifies and expands the display of channels and mixer functions through high contrast OLED graphical displays. The Digital Overlay permanently mounts directly onto the PRO Mixer’s face and connects via a ribbon cable into the Mixer’s side expansion slot.

The naming functions can be accessed and updated through the iOS app or via a computer, for added flexibility. The PRO Digital Overlay is a time saving and easy to read solution to the standard scribble strip for engineers and end users in studio sessions and live entertainment settings.

Compatible with mixer bootloader v2.24 and above.

With the Remote Control, the talkback mic preamp is assignable to stereo masters 1 and 2, mono outputs 1 - 12, and the balanced intercom/slate output. Connects up to 500 feet with a standard CAT5e cable. FOR USE WITH MIX BACK (MB) ONLY.

Hear technologies PRO intercom footswitch
Silently switch your mic between FOH vocal and PRO Mixer intercom

15m RJ45 cable for Hear Back and Hear Back OCTO mixers

External 150 Watt Power Supply and Cable for Hear Back PRO Hub

AM12 ambient & Talkback mic
The AM12 Ambient Microphone is a 12 inch podium-style, condenser gooseneck mic with super cardioid pattern for use with Hear Back PRO Mixer as an ambient or intercom microphone.  The AM12 features 15 volt phantom power, 30hz – 16khz frequency response, and -40db sensitivity.

Hear Back PRO Digital Overlay Four Pack from Hear Technologies
The PRO Digital Overlay is an ultra-thin faceplate for electronic labeling of a Hear Back PRO Mixer. This attachable upgrade modifies and expands the display of channels and mixer functions through high contrast OLED graphical displays. The Digital Overlay permanently mounts directly onto the PRO Mixer’s face and connects via a ribbon cable into the Mixer’s side expansion slot.

The naming functions can be accessed and updated through the iOS app or via a computer, for added flexibility. The PRO Digital Overlay is a time saving and easy to read solution to the standard scribble strip for engineers and end users in studio sessions and live entertainment settings.

ONLY with purchase of any Hear Back PRO Four Pack (Factory mounted).

Compatible with mixer bootloader v2.24 and above.

Extreme Extender ADAT Out by Hear Technologies for Hear Back OCTO
The Extreme Extender was designed to solve ADAT Optical distance limitations. In addition to extending ADAT optical interface up to 500 feet, the Extreme Extender ADAT Out can be connected to the HearBus out of a hub to obtain two ADAT outputs.

Hear Technologies Pack of 5 Blank PVC Overlays for OCTO Mixer. Allows you to save your session and name each channel.