Click for more products.
No produts were found.

WesAudio LC-EQP

WesAudio LC-EQP single channel passive equalizer with tube amplifying stage
The EQ input system is based on a Carnhill linear transformer which matching input impedance. The input impedance is > 1.5 kohm. It Is higher than in similar class devices. As a result, the equalizer does not load the signal source, by which it is controlled. The equalization block is a passive system based on coils, resistors and capacitors. The block has been expanded with additional bands for LOW and HIGH section. The EQ section introduces a high attenuation, exceeding 25dB. A signal regenerative amplifier is a tube system, based on two triodes. The amplifier has been designed without feedback which does not distort transients. The equalizer output is symmetrical. A Carnhill transformer is responsible for output symmetrization, which provides a low output impedance. The anode and heater voltage are stabilized. WesAudio LC-EQP is powered by alternating current 230V / 115V, which can be selected by a voltage selector. The casing is 2U rack made of 1.5mm stainless steel whereas the aluminum front panel is 4mm. LOW section has separate boost regulations and frequency cut offering six bands. HIGH BOOST section has a selection of 12 bands and a regulation of Q factor . HIGH CUT section is equipped with 6 bands. An EQ IN switch is a “True Bypass” type. Switching the equalizer is indicated by a red LED.

WesAudio LC-EQP sound can be described as clean and clear with a tube nature. It is an ideal equalizer on both, single tracks and the sum. LC-EQP WesAudio handles well controlling other studio devices thanks to low output impedance. It was designed as a universal musical equalizer to use in professional recording studios.

Read moreShow less
Add to compare0
Add to wishlist

• Gain: 0dB (+/- 0.5dB)
• Input impedance: >1.5kohm
• Output impedance: 150ohm
• Max. output level: +22dBu (0.8% THD)
• Frequency response: 5Hz – 65kHz (-3dB)
• SNR ratio: 90dB
• LOW BOOST: max +18dB
• LOW CUT: max -18dB
• HIGH BOOST: max +20dB
• HIGH CUT: max -18dB
• LOW BOOST: 20, 30, 60, 100, 120, 250 Hz
• LOW CUT: 20, 30, 60, 100, 120, 250 Hz
• HIGH BOOST: 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 16, 20 kHz
• HIGH CUT: 2, 4, 6, 12, 16, 20 kHz
• AC mains: 115(60Hz) / 230V(50Hz)
• Transformer balanced output and input (XLR Neutrik)
• Case Rack 2U
• Dimensions : 88 x 483 x 237 mm
• Weight: 7 kg

Read moreShow less
Product Details

Data sheet

2 bands Pultec Type EQ
Tracking & Mixing
Inout transformer(s)
Output transformer(s)
2 U
No comments for now. Leave yours once logged in.
25 other products in the same category:
Other products of the same brand
No items



Create a free account to save loved items.

Sign in

Create a free account to use wishlists.

Sign in